Author Topic: Bow drill questions  (Read 3484 times)

0 Members and 1 Guest are viewing this topic.

Offline Outbackbob48

  • Member
  • Posts: 2,752
Bow drill questions
« on: July 02, 2009, 06:03:06 pm »
I just made a bow drill out of paw paw and my base is the same . I 've got quite a few coals from this set up but I am looking to improve    gear. So hears my questions . Is there a preferd thickness for base an also thick or thin for spindle, an after I get my coal what is a good tinder to use besides jute. Thanks in advance. Bob

Offline Wiggy

  • Member
  • Posts: 28
Re: Bow drill questions
« Reply #1 on: July 02, 2009, 08:03:17 pm »
A lot of it depends on what wood you're using, if I'm using a softer wood, I like the board to be a little bigger so I know that I'll have enough wood to make a coal before I just burn a hole through the board. In general, I like mine around a half inch in thickness. For the spindle, it's personal preference. I've found that I get more friction with a wider one, but they seem to take more energy to move than a thinner one. I usually like mine about as big around as a magic marker, nothing bigger around than your thumb. I also make my spindles in the shape of an octagon and not round. That way the string from the bow drill grips it better, but if you use rawhide or a real "grabby" kind of cordage for the string then there isn't much difference between an octagon shaped spindle and a round one. If you have a really smooth textured string, you can braid it to get it to grab the spindle better too.

For the tender, I really like cattail fluff. I put that inside some some cedar or juniper bark shavings. It looks like cattail fluff inside a bird's nest but it catches fire from a coal very quickly. I also let my coal "breathe" for a few seconds (just fan it with your hand while it's still near the hearth board) so it can become more stable before I put it in the tender bundle.
Gleason, TN

Offline Hillbilly

  • Member
  • Posts: 8,248
  • I like tater tots.
Re: Bow drill questions
« Reply #2 on: July 02, 2009, 09:12:30 pm »
I like a fairly thin hearthboard-that way you don't have to pile up a big tall pile of dust in the notch before you can get a coal. Those shelf fungi (cracked-capped polypores) that grow on locust trees make great coal extenders. A couple slices in a tinder bundle really helps when the tinder is a bit damp. For tinder, I like shredded cedar bark, dry grass, pine needles, an old bird nest, anything fine-shredded and dry.
Smoky Mountains, NC

NeolithicHillbilly@gmail.com

Progress might have been all right once but it's gone on for far too long.

Offline ricktrojanowski

  • Member
  • Posts: 2,064
  • Worlds Greatest Deer Repellent
Re: Bow drill questions
« Reply #3 on: July 02, 2009, 10:19:17 pm »
Bob
For my bowdrill setup, I like a spindle about as thick as my thumb, and a board about 1/2" thick,  That pawpaw is pretty soft so I would keep the board on the thick side.  For a harder board like ERC, I would go to about 3/8" thick.  Make sure you keep the handhold lubed.  That really cuts down on unwanted friction.  As far as tinder bundles my favorite material is the inner bark of cedar ( really retted out),  cattail fluff also is good, and like Hillbilly said the CCP really can make a not so good bundle a really good bundle.  If you can't find any let me know,  I'll bring some to Lethcworth.
Traverse City, MI

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,609
Re: Bow drill questions
« Reply #4 on: July 03, 2009, 12:27:03 am »
I have a nice collection of the shelf fungus(CCP) that I have collected. One is about 12" across the wide side.  Steve, you will have to help me with fire making at the camp-o-rama.
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Hillbilly

  • Member
  • Posts: 8,248
  • I like tater tots.
Re: Bow drill questions
« Reply #5 on: July 03, 2009, 11:06:27 am »
We'll do it.
Smoky Mountains, NC

NeolithicHillbilly@gmail.com

Progress might have been all right once but it's gone on for far too long.

Offline smokeu

  • Member
  • Posts: 354
Re: Bow drill questions
« Reply #6 on: July 10, 2009, 11:49:33 pm »
Check out primitiveways.com they have some very good fire making info on several different methods. This is a neat way to have a water proof tinder bundle.                               http://www.primitiveways.com/waterproof_fire_starter.html
Longview, TEXAS

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,609
Re: Bow drill questions
« Reply #7 on: July 12, 2009, 01:03:02 am »
That's a very cool idea. I have all the ingredients. ;D
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC