Author Topic: Request for Marc St.Louis  (Read 4762 times)

0 Members and 1 Guest are viewing this topic.

Offline staveshaver

  • Member
  • Posts: 40
Request for Marc St.Louis
« on: September 07, 2009, 12:40:37 am »
 Hello Mr. St.Louis, I was searching for E.R.C war bows and there is one that came up ,posted by you on Aug.29 '07 but the picture has apparently been erased . I wonder if it would be possible (and not too much trouble) for you to repost that picture. I 've been dying to see that bow ,and I would really appreciate it . Thanks , Bob.

Offline Jmilbrandt

  • Member
  • Posts: 363
Re: Request for Marc St.Louis
« Reply #1 on: September 26, 2009, 10:57:38 pm »
SW Utah

Offline Marc St Louis

  • Administrator
  • Member
  • Posts: 7,869
  • Keep it flexible
    • Marc's Bows and Arrows
Re: Request for Marc St.Louis
« Reply #2 on: September 27, 2009, 10:06:08 am »
Sorry about that Bob.  I just noticed this thread.  The photo hosting site I was using before died on me.  I've updated the pictures in that ERC Warbow thread.
Home of heat-treating, Corbeil, On.  Canada

Marc@Ironwoodbowyer.com

Offline staveshaver

  • Member
  • Posts: 40
Re: Request for Marc St.Louis
« Reply #3 on: September 27, 2009, 08:47:13 pm »
WOW!! Thanks Mark , Well worth the wait. That is an awesome bow, and unbacked ? Would you say E.R.C is ok unbacked as long as you leave some sapwood?

Offline Marc St Louis

  • Administrator
  • Member
  • Posts: 7,869
  • Keep it flexible
    • Marc's Bows and Arrows
Re: Request for Marc St.Louis
« Reply #4 on: September 27, 2009, 08:55:34 pm »
Worked for me Bob.  I don't have that much experience with ERC as it doesn't grow around here but I have heard of some making an all heartwood bow out of it
Home of heat-treating, Corbeil, On.  Canada

Marc@Ironwoodbowyer.com

Offline staveshaver

  • Member
  • Posts: 40
Re: Request for Marc St.Louis
« Reply #5 on: September 27, 2009, 10:45:41 pm »
I was recently in Missouri at my uncles house and the erc there grows very straight and clean for some reason so I harvested a beautiful log . Now that I know I wont have to back it , I'm exited about making a warbow and a longbow from it . If I could bother you with a couple more questions; On warbows do you work them square and then round them?or do you crown them from the start? I just completed an Osage longbow which I found really difficult to work because I crowned it right off. How would you rate the cast of erc? Thanks for your responses Mr. St.Louis I admire your work ,it's a thrill to speak with one of the best bowyers in North America.
« Last Edit: September 27, 2009, 11:00:34 pm by staveshaver »

Offline Marc St Louis

  • Administrator
  • Member
  • Posts: 7,869
  • Keep it flexible
    • Marc's Bows and Arrows
Re: Request for Marc St.Louis
« Reply #6 on: September 28, 2009, 08:30:55 am »
Sent you a PM Bob
Home of heat-treating, Corbeil, On.  Canada

Marc@Ironwoodbowyer.com