Author Topic: Splice question  (Read 2874 times)

0 Members and 1 Guest are viewing this topic.

Grunt

  • Guest
Splice question
« on: January 20, 2010, 07:48:21 pm »
I have some great straight grained oak and hickory cut offs from making board bows. The cutoffs are 30-36 inches. Can I splice boards and come out with a bow? I figure D bows might not work because of handle stress but I might be able to do a stiff handled bow. I figure to back the bows with linen canvas, hickory, or boo. Any comments would be appreciated

Offline youngbowyer33

  • Member
  • Posts: 606
Re: Splice question
« Reply #1 on: January 20, 2010, 07:58:47 pm »
i dont see why it shouldn't
"All we have to decide is what to do with the time that is given to us"

Offline adb

  • Member
  • Posts: 5,339
Re: Splice question
« Reply #2 on: January 20, 2010, 08:06:07 pm »
If you back the bow, yes, it will work.

This bow is a tri-lam: hicory back, bamboo core, and a spliced osage belly, and it is 100# @ 32". I used a W splice.

[attachment deleted by admin]

Offline GregB

  • Member
  • Posts: 4,079
  • Greg Bagwell
Re: Splice question
« Reply #3 on: January 21, 2010, 09:50:09 am »
I would advise making the handle nonbending, but yes most definitely!
Greg

A rich person can be poor monetarily, the best things in life are free...

Offline Tom Leemans

  • Member
  • Posts: 524
Re: Splice question
« Reply #4 on: January 21, 2010, 10:05:57 am »
Yep, go ahead!

adb the tiller on that bow is sweet!

Offline KenH

  • Member
  • Posts: 247
  • The Kilted Cook
    • The Kilted Cook Personal Chef
Re: Splice question
« Reply #5 on: January 21, 2010, 10:54:35 am »
How long would you make the splice?  3"?  6"?  Length of the riser?  Could be an interesting look if say, one limb was maple and the other was walnut.  That would probably make tillering a real pain in the gluteus though...
You Kill It - I Cook It!
Ken Hulme,
The Kilted Cook Personal Chef Service

Grunt

  • Guest
Re: Splice question
« Reply #6 on: January 21, 2010, 01:50:22 pm »
I'm going to make the splices on the first two 4" W shapes. I figure to add just a little reflex to the limbs with the splice. Would it be better to glue it up flat and then glue the backing on Perry style to get the reflex?. Red oak plainsawn with a hickory back will be my first go round. Sure is great to keep finding new stuff to learn!!!

Offline Aries

  • Member
  • Posts: 493
Re: Splice question
« Reply #7 on: January 22, 2010, 12:56:45 am »
I've made some pretty narrow z splices bout 4 in with urac185 with no troubles.  i think you will definitely need a solid handle
"If the only tool you have is a hammer,
                   you tend to see every problem as a nail."
                               ~Abraham Maslow

Offline elk country rp

  • Member
  • Posts: 228
Re: Splice question
« Reply #8 on: January 22, 2010, 04:18:52 pm »
seems like a great excuse to try splicing in some deflex to a nonbending handle after steam bending a few inches of recurve into the tips..... ;)

Grunt

  • Guest
Re: Splice question
« Reply #9 on: January 25, 2010, 08:52:18 pm »
Got the splicing done and I thought I'd post a few pict. I'm going to back the first one with linen canvas and see how it goes. I made both bow blanks out of one 4/4 red oak cut off 36" long and 8" wide. 

[attachment deleted by admin]

Offline islandpiper

  • Member
  • Posts: 635
  • "Just one more bow, OK?"
Re: Splice question
« Reply #10 on: January 26, 2010, 09:35:00 am »
Really nice looking fits in the grafts.  A THIN glueline is most important.  Will you be adding handle risers or extra grip wood?  Looking forward to seeing these done and in use.    piper

Offline bubby

  • Member
  • Posts: 11,054
Re: Splice question
« Reply #11 on: January 26, 2010, 04:54:20 pm »
if the grain is good you don't need to back them less you want to. I've spliced quite a few board bows with no problems. I like the short splice that was in primitive archer mag a while back
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline Josh

  • Member
  • Posts: 3,367
  • Silence is golden but duct tape is silver.
Re: Splice question
« Reply #12 on: January 26, 2010, 05:55:48 pm »
your splices look great Grunt!  Hope the one I am about to do turns out that nice!  I am doing a red oak deflex recurve.  Did you have any problems with tip alignment?  I noticed you left the tips really thick so you can adjust them later.  Looks great!
“The trouble with quotes on the Internet is you never know if they are genuine.” —Abraham Lincoln

Grunt

  • Guest
Re: Splice question
« Reply #13 on: January 26, 2010, 06:05:28 pm »
So far I am adding a 8 "riser and I put a little set back into the board staves.  Alignment can be checked with a string. The grain is good but I have always backed my red oak board bows with linen canvas. I get these shooting and I'll post again.

Offline mox1968

  • Member
  • Posts: 243
Re: Splice question
« Reply #14 on: January 28, 2010, 04:41:34 pm »
nice splice job looking good already