« previous next »
Pages: [1]

Author Topic: Anyone ever make....  (Read 3409 times)

0 Members and 1 Guest are viewing this topic.

Offline kylerprochaska

  • Member
  • Posts: 353
Anyone ever make....
« on: February 27, 2010, 11:25:02 am »
Anyone ever make or attempt to make a bamboo fly fishing rod?  looks like it could be hard but a lot of fun... ???
Logged
GBR!

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,494
Re: Anyone ever make....
« Reply #1 on: February 27, 2010, 12:14:21 pm »
One of our members is a professional(I believe) boo fly rod builder.  8)
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline kylerprochaska

  • Member
  • Posts: 353
Re: Anyone ever make....
« Reply #2 on: February 27, 2010, 03:23:55 pm »
awesome I hope he chimes in too...I want to give it a try but it looks like you need a lot of tools that I don't have....would it work to just straighten a long piece of cane?  or do you have to split a larger piece and taper it down
Logged
GBR!

Offline Hickoryswitch

  • Member
  • Posts: 339
Re: Anyone ever make....
« Reply #3 on: February 28, 2010, 09:39:40 am »
A guy I used to work for built bamboo fly rods. You split and taper each individual lamination. The simplest one is made of two pieces tapered and laminated together. If anyone would like I can get some info from him on tapers and length. From what I've seen him build all you really have to have is a hand plane and to make your self a form to plane the tapers to. The 6 piece rod I'm no sure about.
Logged
Wayne Silverthorn

Offline huntertrapper

  • Member
  • Posts: 1,708
Re: Anyone ever make....
« Reply #4 on: March 01, 2010, 08:58:29 am »
when i was like 13 or so i cut a big shoot and i tied a reel to one end then a paper clip at the other end to hold the line taunt.
Logged
Modern Day Tramp
Pages: [1]
« previous next »