Author Topic: Question about the Ottawa bow  (Read 9915 times)

0 Members and 1 Guest are viewing this topic.

Offline profsaffel

  • Member
  • Posts: 420
Question about the Ottawa bow
« on: February 28, 2010, 11:16:31 pm »
I've read the article several times... am I missing the dimensions some where? I saw the length and I know the bow is less than 3/8ths deep, but what about the width (maximum with the scallops)? I am wondering because I have a piece of short maple I'm considering making one of these bows from but I want to be sure it's wide enough...

Thanks,
Prof
Professor of History, Student of Bowyery

Offline rileyconcrete

  • Member
  • Posts: 606
Re: Question about the Ottawa bow
« Reply #1 on: February 28, 2010, 11:43:50 pm »
If you PM'd HalfEye I am sure he will help you.  He wrote the article and is a great guy to talk with.  He will help you with anything you need.

tell
Tell Riley

Offline profsaffel

  • Member
  • Posts: 420
Re: Question about the Ottawa bow
« Reply #2 on: March 01, 2010, 08:53:45 am »
That's halfeye?!  :P Thanks, I'll do that.
Professor of History, Student of Bowyery

half eye

  • Guest
Re: Question about the Ottawa bow
« Reply #3 on: March 01, 2010, 05:07:29 pm »
Hey Fellas.....just saw this post. I guess I sort of hid the dimensions...kind-of. The rough stave can be between 1-3/4" to 2-1/2" wide and roughly 1/2 to 3/4 inches thick. The narrower you have the stick the shallower you make the scallops. Mostly in the article I made reference to how they did it......three fingers wide X one finger thick....then gave some rough dimensions "for the ruler guys" it probably wasn't the best way to go about it....but was trying to convey the way they did it but tie in some rough dimensions. The bow in the article was ONE design there are others which I posted under "Museum bow pics"....will add that here again for you.
       The pictured example (not the article) has a slight taper to the limbs (about 1-1/2 at the grip to 1" at the tips....and as you sand (flatten) the back and belly you will actually put a very slight taper on the limbs thickness because the sander removes more material as the width decreases. Also this version has fewer scallops that are slightly more shallow.......but it is Annashanabii the direct connection to the Ottawa.
     If you have any more questions feel free to email me at .....rousseau.rd@att.net.....glad to help if I can
half eye
rich rousseau

[attachment deleted by admin]