« previous next »
Pages: [1]

Author Topic: Tiller check @23"  (Read 1604 times)

0 Members and 1 Guest are viewing this topic.

Offline oneeye

  • Member
  • Posts: 118
Tiller check @23"
« on: March 28, 2010, 04:39:11 pm »
This ones got me confused now.
60" ntn .Top limb is on the left. I'm at 49# @ 23" so still have plenty of room to make 55# @ 28 .  Seems like i need to shave a touch off right mid limb and at the right tip to get it to unfold a bit more. Any suggestions? maybe one of those oval templates. Mark it up I so want to finish this one today. thanks,  Scott

 at brace []

at 23" []
after shavin it a bit
at 26"[]
« Last Edit: March 31, 2010, 01:36:13 am by oneeye »
Logged

Offline FlintWalker

  • Member
  • Posts: 2,577
Re: Tiller check @23"
« Reply #1 on: March 28, 2010, 05:03:49 pm »
Top limb looks great. You're right about the bottom though, a little more from just past center out to the tip should do it. ;)
Logged
Be thankfull for all you have, because no matter how bad you think it is...it can always be worse.

rattlesnake

  • Guest
Re: Tiller check @23"
« Reply #2 on: March 28, 2010, 06:58:14 pm »
looks good im thinking a liitle more mid towards tips... a few scrapes ,, then adjust evenly too positive tiller/weight and your done...snake
Logged

Offline Jesse

  • Member
  • Posts: 2,129
Re: Tiller check @23"
« Reply #3 on: March 28, 2010, 11:07:26 pm »
Thats gonna be a sweet bow :)
Logged
"If you can find a path with no obstacles, it probably doesn't lead anywhere."
    --Frank A. Clark
Pages: [1]
« previous next »