Author Topic: Specific Gravity of bow wood?  (Read 8961 times)

0 Members and 1 Guest are viewing this topic.

Offline Easternarcher

  • Member
  • Posts: 622
Specific Gravity of bow wood?
« on: April 03, 2007, 01:30:31 pm »
just found out the S.G. of Jatoba is about .90....anybody know what IPE might be? or maybe elm?

Offline snedeker

  • Member
  • Posts: 905
Re: Specific Gravity of bow wood?
« Reply #1 on: April 03, 2007, 03:26:18 pm »
Ipe is a little over 1.0

American elm is a bit over .55

Dave

Offline Badger

  • Member
  • Posts: 8,120
Re: Specific Gravity of bow wood?
« Reply #2 on: April 03, 2007, 03:47:35 pm »
      You will have an average density for differetn types of wood and find that some woods adhere closer to these averages than others, most woods I have seen have a huge range of difference in density. Thats why I have gone to the mass method instead of the width method. Steve

Offline Coo-wah-chobee

  • Member
  • Posts: 2,503
Re: Specific Gravity of bow wood?
« Reply #3 on: April 03, 2007, 09:46:47 pm »
 ...................................... Ipe can run like Dave (Snedecker) said a little over 1.0. That said I get ipe boards from brazil. This stuff has a specific gravity of  about 1.4. I've gotten a lot of it and its always pretty close. Like Steve said a lot of woods also can have a wide range of density. Mass method sounds sensible to me................bob

DCM

  • Guest
Re: Specific Gravity of bow wood?
« Reply #4 on: April 04, 2007, 09:34:20 am »
Sorry, don't a link or South American/Tropical hardwoods.

http://www.windsorplywood.com/nam_hardwoodspage.html