Author Topic: Grain scale (Read 9019 times)

billmac · « **on:** April 18, 2007, 05:23:33 pm »

Anyone use one of these things? Impressions?

http://www.3riversarchery.com/Product.asp?c=2&s=8&p=50&i=5960

Badger · « **Reply #1 on:** April 18, 2007, 06:35:24 pm »

I have one but don't really care for it, it does seem to be fairly accurate but for me not easy enough to read and measure with. Steve

DanaM · « **Reply #2 on:** April 18, 2007, 07:13:35 pm »

Its cheap and works, buy the digital if ya can afford it.

DanaM

mullet · « **Reply #3 on:** April 18, 2007, 07:43:01 pm »

I use one.It works for what it's made for.

Coo-wah-chobee · « **Reply #4 on:** April 18, 2007, 07:52:47 pm »

Mother Nature gave u a weighing method and a balance beam ! Yur hands, mind an arms.

Have a martin grain scale, its ok, dont use it much, use afore mentioned and have the" thigamiggey."
looks cool and very avant garde (whatever that means)........bob

Pat B · « **Reply #5 on:** April 18, 2007, 08:01:58 pm »

...and Eddie, What would that be?

Pat

DanaM · « **Reply #6 on:** April 18, 2007, 08:40:04 pm »

You been reading the dictionary bob?

DanaM

Coo-wah-chobee · « **Reply #7 on:** April 18, 2007, 08:51:03 pm »

Dictionary

.what that ?.....bob

mullet · « **Reply #8 on:** April 18, 2007, 09:09:30 pm »

Uh,,,Gee Pat,I not sure now.Please enlighten us

if you would on the multiple uses.

Hillbilly · « **Reply #9 on:** April 18, 2007, 10:55:37 pm »

Billmac, I've got one of 'em and it works fine for me, nice and simple, does everything I need it to. Eddie, you mean you didn't get the gram converter with yours?

1/2primitive · « **Reply #10 on:** April 19, 2007, 09:42:22 am »

I use one, yes it works just fine, I hold it against a table or something steady 'till it straightens out.
Sean

duffontap · « **Reply #11 on:** July 03, 2007, 02:37:21 pm »

I have one, too. It's ok. Mine reads 75 grains when it isn't weighing anything so it's not that accurate. It would give you a matched set of arrows though.

J. D. Duff

PeteC · « **Reply #12 on:** July 08, 2007, 10:21:00 pm »

I have one and I like it,and use it often.Also it can be zeroed by bending the little needle dohickey. God Bless

brokennock · « **Reply #13 on:** July 15, 2007, 10:48:26 pm »

I like mine. I hang it from a nail stuck in abeam in my workshop, using a small bungee cord. I don't know how accurate it is. But I really only use it for comparison between shafts when sorting out arrows. For more accurate grain measuring I use my Dillon Reloading powder scale.

Primitive Archer