Author Topic: Burlap Backing  (Read 6008 times)

0 Members and 1 Guest are viewing this topic.

Offline yellow feather

  • Member
  • Posts: 56
Burlap Backing
« on: April 20, 2007, 06:26:10 pm »
If you are going to use burlap,silk or linen for backing on a red oak board bow at about 45#,
how many layers would you use? It's not a perfect board but not too bad.
                                                            David
San Angelo, Texas

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,462
Re: Burlap Backing
« Reply #1 on: April 20, 2007, 06:58:11 pm »
Those materials won't add any weight to your bow but will protect it from splinters lifting along the back. You will have to build the bow to the weight you want. Add the backing either before  you start or after she's done. Pat
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline yellow feather

  • Member
  • Posts: 56
Re: Burlap Backing
« Reply #2 on: April 20, 2007, 07:01:15 pm »
Thanks. But I want to know if one layer is enough and can you use 2 peices joined at the riser?
                                                                                          David
San Angelo, Texas

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,462
Re: Burlap Backing
« Reply #3 on: April 20, 2007, 07:11:38 pm »
You can join it at the handle.  ::)  Actually most soft backings are easier to deal with if they are in 2 pieces and joined at the handle. Because there is usually no(or not much) stresses in the handle area of stiff handled bows you shouldn't have to do more than glue it down and add a handle wrap.
   One layer of cloth should be plenty enough for protection. By adding more, you are adding weight which detracts from the bows cast.   Pat
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline yellow feather

  • Member
  • Posts: 56
Re: Burlap Backing
« Reply #4 on: April 20, 2007, 07:25:08 pm »
Thanks Pat. I'm gonna give it a whirl.
                           David
San Angelo, Texas