« previous next »
Pages: [1]

Author Topic: gentlemans bow ! (not for bom)  (Read 2686 times)

0 Members and 1 Guest are viewing this topic.

Offline ken75

  • Member
  • Posts: 1,886
  • crepe myrtle is my "yella wood"
gentlemans bow ! (not for bom)
« on: November 24, 2010, 02:00:30 pm »
heres a 68 inch hickory backed ipe with some lams of beefwood on the belly . this one came in at 48lbs at 28 inches only the second elb that ive made and i think this ones a little better. beefwood limb tip overlays , widest part of this bow at the handle is one inch (whole things made from scraps). i took this one out to flight shoot today with my experiment it had a four shot average of 158 yrds ,hope yall enjoy
« Last Edit: November 24, 2010, 02:03:34 pm by ken75 »
Logged

Offline ken75

  • Member
  • Posts: 1,886
  • crepe myrtle is my "yella wood"
Re: gentlemans bow ! (not for bom)
« Reply #1 on: November 24, 2010, 02:01:53 pm »
last ones
Logged

Offline Kent D.

  • Member
  • Posts: 331
Re: gentlemans bow ! (not for bom)
« Reply #2 on: November 24, 2010, 02:09:15 pm »
Nice job. ;)
Logged

Offline ken75

  • Member
  • Posts: 1,886
  • crepe myrtle is my "yella wood"
Re: gentlemans bow ! (not for bom)
« Reply #3 on: November 24, 2010, 04:31:11 pm »
thanks kent !
Logged

Offline NTD

  • Member
  • Posts: 1,771
Re: gentlemans bow ! (not for bom)
« Reply #4 on: November 24, 2010, 09:18:04 pm »
Looks good Ken.  Did you do a round belly or flat.  I'm really wanting to try a round belly ipe longbow, I know there are better performance options but they just seem so classy.
Logged
Nate Danforth

Offline adb

  • Member
  • Posts: 5,339
Re: gentlemans bow ! (not for bom)
« Reply #5 on: November 24, 2010, 09:19:43 pm »
Nice. It's a bit hard to see the tiller, but it looks good.
Logged

Offline ken75

  • Member
  • Posts: 1,886
  • crepe myrtle is my "yella wood"
Re: gentlemans bow ! (not for bom)
« Reply #6 on: November 25, 2010, 12:09:21 am »
Nate its slightly rounded if it had been more than scraps i might would have had enough wood to completely round. im going to glue up a cuple hic cherry ones and try on them.
thanks adam
Logged

Offline ohma

  • Member
  • Posts: 279
Re: gentlemans bow ! (not for bom)
« Reply #7 on: November 25, 2010, 10:36:18 am »
nice scrap bow ken, ive picked up alot of throwed down splits and made good bows from them.i like it.
Logged
if your not dead you are getting older so get out and shoot some arrows.

Offline half eye

  • Member
  • Posts: 3,300
Re: gentlemans bow ! (not for bom)
« Reply #8 on: November 25, 2010, 10:39:49 am »
I'm with Ohma, nice and classic looking long bow. The cast is pretty darned good for hunting weight arrows and broadheads. Sorry, I cant help but ask.....do we know any "gentleman"?  ;D
rich
Logged

Offline ken75

  • Member
  • Posts: 1,886
  • crepe myrtle is my "yella wood"
Re: gentlemans bow ! (not for bom)
« Reply #9 on: November 25, 2010, 01:16:29 pm »
thanks ohma
thanks rich....not many these days
Logged
Pages: [1]
« previous next »