« previous next »
Pages: [1]

Author Topic: fat or no fat  (Read 4117 times)

0 Members and 1 Guest are viewing this topic.

Offline billmac

  • Member
  • Posts: 82
fat or no fat
« on: May 04, 2007, 10:00:23 am »
I got a 1000 degree heat gun yesterday.  If I want to use it to reflex limbs, so I need to put fat on the limbs first?  Doesn't that screw up the finish (unless you use fat in the finish anyway).
Logged

Offline longfletch

  • Member
  • Posts: 37
Re: fat or no fat
« Reply #1 on: May 04, 2007, 12:23:00 pm »
iv rubbed linseed oil on mine and heated out deflex and bends, it didnt  bother the finish of spar.
bryan
Logged
i like poetry, long walks and the beach and poking dead things with a stick

Offline venisonburger

  • Member
  • Posts: 1,042
Re: fat or no fat
« Reply #2 on: May 05, 2007, 05:59:53 pm »
I use crisco shortning, it seems to keep the wood from scorching, the last bow I did I used pam spray coating, it worked also.
If you wipe with acetone before you put a finish on it will remove the oil.
VB
Logged

Offline AndrewS

  • Member
  • Posts: 798
Re: fat or no fat
« Reply #3 on: May 05, 2007, 07:19:48 pm »
Normally I use sunfloweroil.
Logged
Pages: [1]
« previous next »