Author Topic: String Making Quick Braid  (Read 4610 times)

0 Members and 1 Guest are viewing this topic.

Offline oneeye

  • Member
  • Posts: 118
String Making Quick Braid
« on: December 20, 2010, 10:43:27 pm »
A few years ago Ed Scott taught me this quick way of making a string out of b-50. He called it the "Scott Twist"  Takes less than five minutes.

 Start with 3 bundles of 5.                            Twist each bundle away from you. Then 1 bundle over the otner 2bundles(1 over 2and3,  2 over 3 and 1 ...) 20 or so times and keep twisting each bundle  as you lay them over the other 2.

[]  []

                                                              form a loop and pair the bundles by twisting them together
[]   []

Then make a simple braid until your past your tag ends.  Tie a bowyers knot for the other side.  Simple
[] ]


Offline CraigMBeckett

  • Member
  • Posts: 398
Re: String Making Quick Braid
« Reply #1 on: January 06, 2011, 02:29:10 am »
oneeye,

I'm not sure from your description but are you essentially making a Flemish twist for only the eye/loop then plaiting/braiding the tail rather than laying it in?

If so then wouldn't this produce an inferior string as the platted/braided tails would stretch each time the bow is shot?

Craig.

Offline Justin Snyder

  • Administrator
  • Member
  • Posts: 13,794
Re: String Making Quick Braid
« Reply #2 on: January 06, 2011, 11:17:46 am »
I think Marc St Louis did a how to article in the magazine similar to this a while back.
Justin
Everything happens for a reason, sometimes the reason is you made a bad decision.


SW Utah