« previous next »
Pages: 1 [2] 3

Author Topic: Trade Points/Bandsaw material  (Read 9264 times)

0 Members and 1 Guest are viewing this topic.

JustinNC

  • Guest
Re: Trade Points/Bandsaw material
« Reply #15 on: March 01, 2011, 10:14:25 pm »
Sorry Pat, can't change an order once it's been placed.

Kidding, which would you rather have? No edge or me put an edge? If you want me to do it let me know which sides you want filed.
Logged

Offline Eric Garza

  • Member
  • Posts: 587
Re: Trade Points/Bandsaw material
« Reply #16 on: March 01, 2011, 10:42:41 pm »
Sounds good Justin.  Maybe put a photo of Pat's design, as I might be willing to try those.  I'm not incredibly fixated on the design I came up with, I was just messing around and thought it would be neat to try.
Logged

JustinNC

  • Guest
Re: Trade Points/Bandsaw material
« Reply #17 on: March 01, 2011, 10:50:05 pm »
Engineer with too much CAD time it appears lol

My last template was draw on cad, ill probably put Pats onto CAD just to make sure I'm even and consistent.
Logged

Offline Elktracker

  • Member
  • Posts: 1,964
  • Josh
Re: Trade Points/Bandsaw material
« Reply #18 on: March 01, 2011, 10:52:17 pm »
If you dont mind me asking whats CAD? thanks
Logged
my friends think my shops a mess, my wife thinks I have too much bow wood, my neighbors think im redneck white trash and they may all be right on the money!!

Josh Vance  Netarts OR. (Tillamook)

JustinNC

  • Guest
Re: Trade Points/Bandsaw material
« Reply #19 on: March 01, 2011, 10:58:32 pm »
Computer aided? Drawing I think lol. Used it a lot in my previous job and a little in my current drawing.

Used to make 2D and 3D drawings, generally plans on how to build a given object, really limitless. I used it primarily for mapping. A lot of modern day surveys are drawn with it.
Logged

JustinNC

  • Guest
Re: Trade Points/Bandsaw material
« Reply #20 on: March 01, 2011, 10:59:32 pm »
Computer aided? Drawing I think lol. Used it a lot in my previous job and a little in my current drawing.

Used to make 2D and 3D drawings, generally plans on how to build a given object, really limitless. I used it primarily for mapping. A lot of modern day surveys are drawn with it.
Logged

Offline Elktracker

  • Member
  • Posts: 1,964
  • Josh
Re: Trade Points/Bandsaw material
« Reply #21 on: March 01, 2011, 11:20:52 pm »
I see thanks ;D
Logged
my friends think my shops a mess, my wife thinks I have too much bow wood, my neighbors think im redneck white trash and they may all be right on the money!!

Josh Vance  Netarts OR. (Tillamook)

Offline aero86

  • Member
  • Posts: 1,263
Re: Trade Points/Bandsaw material
« Reply #22 on: March 01, 2011, 11:49:31 pm »
think you can make 2 or 3 like PeteC made here in this pic?

http://www.primitivearcher.com/smf/index.php?action=dlattach;topic=23845.0;attach=42409

looks like a fairly long tang on it
Logged
profsaffel  "clogs like the devil" I always figured Lucifer to be more of a disco kind of guy.

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,496
Re: Trade Points/Bandsaw material
« Reply #23 on: March 02, 2011, 01:53:51 am »
Justin, if you are set up to put a bevel on them by all means do so. I shoot primarily left wing.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline criveraville

  • Member
  • Posts: 3,210
  • Psalm 127:4
Re: Trade Points/Bandsaw material
« Reply #24 on: March 02, 2011, 02:40:49 am »
Eric what thickness steal are you looking for.
Logged
I was HECHO EN MEXICO, but assembled in Texas and I'm Texican as the day is long...  Psalm 127:4 As arrows are in the hand of a mighty man; so are children of the youth.

Offline Eric Garza

  • Member
  • Posts: 587
Re: Trade Points/Bandsaw material
« Reply #25 on: March 02, 2011, 08:43:14 am »
I'm not looking for a particular thickness, but rather for a thickness that will yield a point that's around 175-200 grains once it's cut out and has a bevel ground on it. 
Logged

JustinNC

  • Guest
Re: Trade Points/Bandsaw material
« Reply #26 on: March 02, 2011, 10:12:58 am »
Eric I doubt these will do that. Ill weight the ones I make Pat and let you know. I'm thinking a furrell (spelling?) Would have ro be added for that weight.
Logged

JustinNC

  • Guest
Re: Trade Points/Bandsaw material
« Reply #27 on: March 02, 2011, 11:13:13 am »
Quote from: aero86 on March 01, 2011, 11:49:31 pm
think you can make 2 or 3 like PeteC made here in this pic?

http://www.primitivearcher.com/smf/index.php?action=dlattach;topic=23845.0;attach=42409

looks like a fairly long tang on it

Possibly...take a number and get in line  ;D
Logged

Offline aero86

  • Member
  • Posts: 1,263
Re: Trade Points/Bandsaw material
« Reply #28 on: March 02, 2011, 03:10:24 pm »
k, thanks, let me know!
Logged
profsaffel  "clogs like the devil" I always figured Lucifer to be more of a disco kind of guy.

Offline Eric Garza

  • Member
  • Posts: 587
Re: Trade Points/Bandsaw material
« Reply #29 on: March 06, 2011, 08:28:51 pm »
You can take my name off the list.  Just bought 100 trade points from Abowyer at $1.85 each, so that's plenty of points to last me.
Logged
Pages: 1 [2] 3
« previous next »