« previous next »
Pages: [1]

Author Topic: coyote quiver  (Read 1966 times)

0 Members and 1 Guest are viewing this topic.

Offline sadiejane

  • Member
  • Posts: 1,030
coyote quiver
« on: June 08, 2011, 11:15:27 am »
well, these may seem the obvious, but i need to ask before i start doing any cutting n this very nice case coyote hide i have.
most all coyote hide quivers i've seen have the head laying down the back. the only way i can see to get it like that is to cut off the head and sew it hanging  in the opposite direction.
am i missing something?  thanks fellas
Logged
wild women don't get the blues

Offline Justin Snyder

  • Administrator
  • Member
  • Posts: 13,794
Re: coyote quiver
« Reply #1 on: June 08, 2011, 01:29:54 pm »
not missing anything
Logged
Everything happens for a reason, sometimes the reason is you made a bad decision.


SW Utah

Offline half eye

  • Member
  • Posts: 3,300
Re: coyote quiver
« Reply #2 on: June 08, 2011, 03:24:31 pm »
Sadie,
     The rear ends are larger diameter than the front.....thats why the NA's made 'em "butt-up".....they used the tail as a hanging decoration by leaving it in place. So like Justin said ....if ya want the "face" at the arrow opening, and facing down, gonna need to cut it off first.
      Ya didn't ask but here's some pics of the "usual" way they was made. All of these have the heads "down" but they may help ya out some.
rich
Logged
Pages: [1]
« previous next »