Author Topic: Pressure Flaking  (Read 1199 times)

0 Members and 1 Guest are viewing this topic.

Offline bushman

  • Member
  • Posts: 282
Pressure Flaking
« on: July 27, 2011, 02:27:59 am »
When you guys are pressure flaking how long is the longest flake you can drive off?
Bushman

Offline FlintWalker

  • Member
  • Posts: 2,577
Re: Pressure Flaking
« Reply #1 on: July 27, 2011, 03:51:04 am »
I consider anything over 1.5" a pretty long flake.
Be thankfull for all you have, because no matter how bad you think it is...it can always be worse.

Offline Tower

  • Member
  • Posts: 2,296
Re: Pressure Flaking
« Reply #2 on: July 27, 2011, 09:42:43 am »
There are a lot of circumstances that control a flakes length. Under the right conditions 1.5 - 2in . That's with my Ishi stick.
He who sacrifices freedom for a security deserves neither one.  Benjamin Franklin!

remington22

  • Guest
Re: Pressure Flaking
« Reply #3 on: July 27, 2011, 06:41:16 pm »
Man I must be doing something wrong, I would be happy with 3/4" Please explain how to get pressure flakes 1 1/2" long.

Offline bushman

  • Member
  • Posts: 282
Re: Pressure Flaking
« Reply #4 on: July 27, 2011, 08:58:26 pm »
Ok, just using a hand pressure flaker I’m mostly getting ½ to ¾ flakes but I have driven off a few inch and a half flakes (most of the time when I didn’t want too and I took off the opposite edge of the point with an overshot.)

JustinNC

  • Guest
Re: Pressure Flaking
« Reply #5 on: July 27, 2011, 09:29:17 pm »
1.5" on a platform set up perfectly with a good ridgeline.

Offline crooketarrow

  • Member
  • Posts: 2,790
Re: Pressure Flaking
« Reply #6 on: July 28, 2011, 01:36:25 pm »
    I mainly only make hunting points but a 1 1/2's killer.I've never start out with materal for one that long. I think 1/2 to 3/4's really good. I've got to get out of the closet more often.
DEAD IS DEAD NO MATTER HOW FAST YOUR ARROW GETS THERE
20 YEARS OF DOING 20 YEARS OF LEARNING 20 YEARS OF TEACHING