Author Topic: Projecting weight  (Read 5637 times)

0 Members and 1 Guest are viewing this topic.

Offline NOMADIC PIRATE

  • Member
  • Posts: 1,910
Projecting weight
« on: June 29, 2007, 12:57:37 pm »
I'm in the process of making my first sinew backed bow, I've got a tillering tree, but I'm farely new to it.

I've tillered the bow to 20", I would like to have it in the mid 50#'s st 26" before sinewing it, but I'd like just to pretiller it to 20",...... what weight should I look for at 20" for a projected weight of 55# @ 26"


If this is of any help, the bow is 58" ntn , I didn't flip the tips yet but it has 2" of natural reflex still


Thanks

Manny
NORTH SHORE, HAWAII

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 32,174
  • if you have to ask you wouldn't understand ,Tenn.
Re: Projecting weight
« Reply #1 on: June 29, 2007, 01:27:25 pm »
on the low end around 40 high end 45.I usually gain around 2 to 3 lbs. pr.inch.as a pretty good rule of thumb. :) The las one I did sinew on I tillered it to around 30@15 and then added it but I only put on 2 layers and it picked it up about 8/10 lbs. if I remember right. :) I did that to give me plenty of wood to correct anything the sinew may change.It wound up 53@26.
   Pappy
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

DCM

  • Guest
Re: Projecting weight
« Reply #2 on: June 29, 2007, 01:28:55 pm »
3# per inch is the rule of thumb but 2.5# would put you on the safe side considering the middle draw inches generally are a little softer.  So, 55 - (6*2.5) = 40#.  Figure another 5# to 10# of draw from the sinew, although in your climate I'd estimate on the lower side of that.

Offline NOMADIC PIRATE

  • Member
  • Posts: 1,910
Re: Projecting weight
« Reply #3 on: June 29, 2007, 02:07:04 pm »
Thanks guys, I think I had it at 40# 20" yesterday,...I was just tempering it now,....WOW so much moisture beading out of the limbs :o :o :o
NORTH SHORE, HAWAII

Offline Justin Snyder

  • Administrator
  • Member
  • Posts: 13,794
Re: Projecting weight
« Reply #4 on: June 29, 2007, 06:12:55 pm »
Nothing like using a heat gun, with dry heat, to steam a bow.  ;) Justin
Everything happens for a reason, sometimes the reason is you made a bad decision.


SW Utah