Author Topic: turkey fryer heat treating  (Read 10310 times)

0 Members and 1 Guest are viewing this topic.

Offline Dalton Knapper

  • Member
  • Posts: 339
Re: turkey fryer heat treating
« Reply #30 on: March 28, 2013, 04:40:47 pm »
Yes - the liner has to go. And someone mentioned the rocks not touching - I never worry about that and can't for the life of me think of a physics reason why that would matter. The more mass the better. Fill 'er up even if it's mostly sand. Corners are the hottest place and thin spalls are best there.

Offline bubby

  • Member
  • Posts: 11,054
Re: turkey fryer heat treating
« Reply #31 on: March 28, 2013, 04:59:41 pm »
I never take the sand out of mine, use a garden fork to rake the rock out, bub
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Stringman

  • Guest
Re: turkey fryer heat treating
« Reply #32 on: March 28, 2013, 07:18:21 pm »
"Wal mart sells these around most holidays for about $25. Use the heck out of it and if it burns up - take it back."

Uhh- ethically speaking, I'm not sure that's what we should be teaching the kiddies.  (Daddy, isn't that a lot like stealing?!?). :-[ ???

Scott

Offline TRACY

  • Member
  • Posts: 4,523
Re: turkey fryer heat treating
« Reply #33 on: March 28, 2013, 07:54:56 pm »
I never take the sand out of mine, use a garden fork to rake the rock out, bub

Sounds like feng shu therapy yoda  >:D
« Last Edit: March 30, 2013, 10:07:49 am by TRACY »
It is what it is - make the most of it!    PN500956

Offline RickB

  • Member
  • Posts: 292
Re: turkey fryer heat treating
« Reply #34 on: March 29, 2013, 12:00:05 am »
I lucked out and found an old Hamilton Beach cooker at the flea market last weekend for $10. It's bigger and more solid/heavier than the one I got at Walmart. Temp on the dial goes up to 500 degrees. Rick B

Offline chertle

  • Member
  • Posts: 156
Re: turkey fryer heat treating
« Reply #35 on: March 29, 2013, 10:43:04 pm »
Gonna be doing this soon!! Been finding some rock that works ok......I think it will be awesome with a little heat 8)
Leslie
Indiana

Offline Will H

  • Member
  • Posts: 2,120
Re: turkey fryer heat treating
« Reply #36 on: March 29, 2013, 11:47:23 pm »
Sounds like the one I have Rick. I like mine alot, without the pan I can get around 650 on the sides and close to the bottom.
Proud Member of Twin Oaks Bowhunters
           Clarksville, Tennessee

   "Middle Tennessee is the place to be"

Offline TRACY

  • Member
  • Posts: 4,523
Re: turkey fryer heat treating
« Reply #37 on: April 18, 2013, 09:55:53 pm »
Darnit! I cooked my first batch of rock this week with all the advice here for drying time and cook times and now I'm hooked! I cooked Texas rock from Seider's rock pile , local porous and grainy chert, and some buffalo river from , well , buffalo river. I am impressed with the improvement of knapping this new rock. That Texas stuff rocks! Going to have to get more when this runs out. I'm a fan of heat treated rock. No doubt the paleo people did heat treat from the artifacts I've found here and how the local chert knaps now since heat treating.

Tracy
It is what it is - make the most of it!    PN500956