Author Topic: knox for backing ?  (Read 3301 times)

0 Members and 1 Guest are viewing this topic.

Offline seabass

  • Member
  • Posts: 2,267
knox for backing ?
« on: January 06, 2012, 05:58:12 pm »
hey guys.i have heard that you can use knox gelatin in place of hide glue.i have already ordered real hide glue because i didn't trust it.i am wanting to hear what you guys think.let me in on your expirences.thanks in advace,Steve
Middletown,Ohio

Offline osage outlaw

  • Member
  • Posts: 11,952
Re: knox for backing ?
« Reply #1 on: January 06, 2012, 06:13:07 pm »
I have used it with sinew a few times.  I had one failure, but that was my fault.  I used oil while heat bending the wood and I didn't degrease the bow good enough.  The sinew came loose.  I degreased the bow and backed it again with the knox and it has been fine ever since.  In the TBB vol. 1 they rate it very strong.  I think it was the second or third best glue they tested.
I started out with nothin' and I still got most of it left

Offline seabass

  • Member
  • Posts: 2,267
Re: knox for backing ?
« Reply #2 on: January 06, 2012, 06:18:50 pm »
thanks osage.i have tons of the stuff.i use it on sinew for wrapping arrows and it holds good.i was a little uneasy using it for rawhide or sinew on my bows.thanks again buddy,Steve
Middletown,Ohio

Offline osage outlaw

  • Member
  • Posts: 11,952
Re: knox for backing ?
« Reply #3 on: January 06, 2012, 06:26:10 pm »
That has been my experience with it.  You might want to see if anybody else gives their opionion.  I have a lot of sinew scraps I can send to you if you ever want to try to make your own glue.  I want to give that a try one of these days. 
I started out with nothin' and I still got most of it left

Offline seabass

  • Member
  • Posts: 2,267
Re: knox for backing ?
« Reply #4 on: January 06, 2012, 06:35:44 pm »
thanks Osage,i have tons of sinew also.i have been wanting to cook my own also.i have had little time lately.i have been building that new casino up in toledo 70 hours a week.i am home now and back to building bows.if your glue turns out,let me know and i will do the same.thanks again and hope to see you and your son down at the classic.i spoke to you last time but some how lost you.you had just arrived and was looking for Pat i think.well anyway,i'll see you there.
Middletown,Ohio

Offline osage outlaw

  • Member
  • Posts: 11,952
Re: knox for backing ?
« Reply #5 on: January 06, 2012, 09:50:25 pm »
thanks Osage,i have tons of sinew also.i have been wanting to cook my own also.i have had little time lately.i have been building that new casino up in toledo 70 hours a week.i am home now and back to building bows.if your glue turns out,let me know and i will do the same.thanks again and hope to see you and your son down at the classic.i spoke to you last time but some how lost you.you had just arrived and was looking for Pat i think.well anyway,i'll see you there.

We plan on going back down again this year.  We will have to meet up again.  Good luck with your glue also.
I started out with nothin' and I still got most of it left

Offline JW_Halverson

  • Member
  • Posts: 11,850
Re: knox for backing ?
« Reply #6 on: January 06, 2012, 11:04:49 pm »
I've always had great luck with Knox gelatin as well as generic versions. 

I've made my own hide glues as well using sinew scraps.  I prefer the baking method since I don't have to watch the pot so close.  Put your sinew scraps in an oven approved baking dish, cover with distilled water (not necessary, but why add minerals that might weaken the glue), put the cover on the dish, and put in the oven at the lowest temp it will operate at.  6 hours is good, 12 is better.  Just check once in a while and add more distilled water as needed to keep the sinew covered.  Strain thru cheesecloth or a fine wire mesh strainer into a shallow pan and let cool. 

I usually freeze it then, but in the past I have cut it in very thin strips and put it in a cool place with a fan on it dry it out.  If you choose to freeze it you don't have to putz with re-hydrating!
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.

Offline seabass

  • Member
  • Posts: 2,267
Re: knox for backing ?
« Reply #7 on: January 06, 2012, 11:40:46 pm »
thank you for the tips JW.i have never cooked my own.i do have alot of scrap sinew.now i know how to do it now.thanks again.hopefully i can meet you at the classic also.please try to make it.it is a great time.see you soon,Steve
Middletown,Ohio

Offline JW_Halverson

  • Member
  • Posts: 11,850
Re: knox for backing ?
« Reply #8 on: January 06, 2012, 11:56:40 pm »
There's a chance this pale Northerner may be down there this year, but I don't wanna say anything and jinx it like last year. 
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.

Offline cracker

  • Member
  • Posts: 3,123
Re: knox for backing ?
« Reply #9 on: January 07, 2012, 12:04:28 am »
JW crossing my fingers.
If we can't help each other what is the point of being here?

Offline JW_Halverson

  • Member
  • Posts: 11,850
Re: knox for backing ?
« Reply #10 on: January 07, 2012, 12:06:24 am »
I got my legs crossed too.  But then there is a line to the bathroom, too.
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.

Offline LEGIONNAIRE

  • Member
  • Posts: 632
Re: knox for backing ?
« Reply #11 on: January 07, 2012, 12:17:33 am »
Hey Steve
 the Knox Gelatin works exelent for backing bow. It holds up and is very strong. I have never had a failure. Now a days I use that exclusively. The first sizing layer should be runny so it penetrates the wood. the only problem i see with knox is that it gels quickly as oppose to hide glue which takes time. There are other brands which gel slower and I prefer those just because of that. Good luck with your bow
CESAR

LEGIONNAIRE ARCHERY

Offline osage outlaw

  • Member
  • Posts: 11,952
Re: knox for backing ?
« Reply #12 on: January 07, 2012, 12:58:51 am »
There's a chance this pale Northerner may be down there this year, but I don't wanna say anything and jinx it like last year.

Let me know if you are going to be there.  I might have a little something for you ;)
I started out with nothin' and I still got most of it left

Offline seabass

  • Member
  • Posts: 2,267
Re: knox for backing ?
« Reply #13 on: January 07, 2012, 02:33:14 pm »
thank you everyone for the advice.Jw,i hope you can make it this year.Osage i will look you up at the classic.i will be there 4/27/12.see y'all there,Steve
Middletown,Ohio