Author Topic: Linseed oil and heat treating  (Read 4796 times)

0 Members and 1 Guest are viewing this topic.

SimonUK

  • Guest
Linseed oil and heat treating
« on: August 28, 2007, 07:24:20 pm »
Is it a bad idea to heat treat the belly of a bow that has linseed oil applied? Do I need to have fire extinguishers at hand?

Thanks. Simon.

Offline Marc St Louis

  • Administrator
  • Member
  • Posts: 7,869
  • Keep it flexible
    • Marc's Bows and Arrows
Re: Linseed oil and heat treating
« Reply #1 on: August 28, 2007, 08:10:01 pm »
No problem, go ahead.
Home of heat-treating, Corbeil, On.  Canada

Marc@Ironwoodbowyer.com

Offline D. Tiller

  • Member
  • Posts: 3,507
  • Go ahead! Bend that stick! Make my day!!!
    • Whidbey Island Soap Co.
Re: Linseed oil and heat treating
« Reply #2 on: August 28, 2007, 08:52:01 pm »
Hmm!!!  Got any marshmallows?
“People are less likely to shoot at you if you smile at them” - Mad Jack Churchill

SimonUK

  • Guest
Re: Linseed oil and heat treating
« Reply #3 on: August 29, 2007, 07:33:07 pm »
Any consensus?

I ask the question because the label on the bottle says 'avoid contact with clothes - spontaneous combustion is possible'  :o  What's this stuff going to do when I hold my bow over the gas cooker? (That's how I'm planning to do it, sorry didn't mention that)

Offline Kegan

  • Member
  • Posts: 2,676
Re: Linseed oil and heat treating
« Reply #4 on: August 29, 2007, 08:40:16 pm »
My brother and I tested how flamable linseed was by burning a small cloth in the old firepit that was used to apply linseed. Didn't burn well. I have used heat onto linseed, and it doesn't catch but it does burn a little, making it black. I usually just sand it off and then heat it, looks prettier that way :)

Offline Marc St Louis

  • Administrator
  • Member
  • Posts: 7,869
  • Keep it flexible
    • Marc's Bows and Arrows
Re: Linseed oil and heat treating
« Reply #5 on: August 29, 2007, 09:22:40 pm »
I've heated it till it smokes with a heat gun. Didn't catch fire. Not likely to do any more than that using an open flame
Home of heat-treating, Corbeil, On.  Canada

Marc@Ironwoodbowyer.com

Offline Coo-wah-chobee

  • Member
  • Posts: 2,503
Re: Linseed oil and heat treating
« Reply #6 on: August 29, 2007, 09:40:39 pm »
                     Like Marc said..............bob

SimonUK

  • Guest
Re: Linseed oil and heat treating
« Reply #7 on: August 30, 2007, 06:23:55 am »
Thanks guys.

Dustybaer

  • Guest
Re: Linseed oil and heat treating
« Reply #8 on: August 30, 2007, 08:48:11 am »
if i understood it correctly, spontaneous combustion can only happen while the oil is drying.  it's the vapors, that are so flamable.  once the oil is dry, it should be safe.