Author Topic: Hickory/Ipe Glue Up  (Read 10950 times)

0 Members and 1 Guest are viewing this topic.

Offline snedeker

  • Member
  • Posts: 905
Re: Hickory/Ipe Glue Up
« Reply #15 on: September 11, 2007, 10:23:01 pm »
Ipe loves Tb3.   You've got pretty good thickness.  One idea would be to flatten the central area and put a thin bell lam of something contrasting, like Wenge or Goncal Alves on to stiffen the mid=section and decorate.  Maybe 12" long.

Dave

Offline Justin Snyder

  • Administrator
  • Member
  • Posts: 13,794
Re: Hickory/Ipe Glue Up
« Reply #16 on: September 12, 2007, 12:23:28 am »
Was the oven cleaner for good medicine? You'll have to name it "Mr. Clean"  :)
Hey now, I represent that remark.  ;D Justin
Everything happens for a reason, sometimes the reason is you made a bad decision.


SW Utah

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,886
  • Eddie Parker
Re: Hickory/Ipe Glue Up
« Reply #17 on: September 12, 2007, 06:11:42 pm »
  Rich,Fresh out of Buffalo Pee. ;D Hey ,don't laugh at the oven cleaner.I've used it cleaning grease off of engine blocks.
it was a very nice Ipe stave,thanks Bob.I wasn't taking any chances.
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline Justin Snyder

  • Administrator
  • Member
  • Posts: 13,794
Re: Hickory/Ipe Glue Up
« Reply #18 on: September 12, 2007, 06:37:53 pm »
If you eat nothing but prairie grass for a month, maybe you can just pee on it yourself.  8) Justin
Everything happens for a reason, sometimes the reason is you made a bad decision.


SW Utah

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,886
  • Eddie Parker
Re: Hickory/Ipe Glue Up
« Reply #19 on: September 12, 2007, 09:13:33 pm »
  Sounds like way to much roughage to me
Lakeland, Florida
 If you have to pull the trigger, is it really archery?