Author Topic: an easy board bow build, full draw pics added/i am going to attach pics again  (Read 145713 times)

0 Members and 1 Guest are viewing this topic.

Offline loon

  • Member
  • Posts: 1,307
Re: an easy board bow build, full draw pics added
« Reply #60 on: February 04, 2016, 12:11:37 pm »
So I'd "only" need a 76" ttt board for a 33" draw? (unless I wanna start drawing to my chin instead of to behind my ear :|) wonder if that'd have handshock. I like the look of pyramid bows. Real simple. Takedown one would be nice...

Offline bubby

  • Member
  • Posts: 11,054
Re: an easy board bow build, full draw pics added
« Reply #61 on: February 04, 2016, 12:32:13 pm »
Loin i would think 70" ntn would be plenty of length although 33 seems super long draw length
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline uacowboy

  • Member
  • Posts: 15
Re: an easy board bow build, full draw pics added
« Reply #62 on: May 19, 2016, 07:03:00 pm »
What is the reason for stopping the rip at the fade marks? i feel like it is probably obvious but i am just not seeing it. TIA

Offline bubby

  • Member
  • Posts: 11,054
Re: an easy board bow build, full draw pics added
« Reply #63 on: May 19, 2016, 07:25:52 pm »
The reason is the handle, rip the full length glue a larger handle on and when tillering if it gets bending to close to the fades a common occurrence, the handle pops off
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline loon

  • Member
  • Posts: 1,307
Re: an easy board bow build, full draw pics added
« Reply #64 on: June 24, 2016, 02:08:33 am »
Really hoping I'll have time to do this, planning to do a few maple and hickory bows this way

Would these dimensions be reasonable for a 70#@28.5" hickory bow?

Thanks

Offline bubby

  • Member
  • Posts: 11,054
Re: an easy board bow build, full draw pics added
« Reply #65 on: June 24, 2016, 10:52:29 am »
you would need to start with a thicker limb for 70# but the basic design will be fine
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline Justin.schmidt23

  • Member
  • Posts: 145
Re: an easy board bow build, full draw pics added
« Reply #66 on: July 20, 2016, 01:17:09 am »
I know thisis kinda old but I gotta say this was a GREAT build along. So kudos man. What would be a good thickness for a 60in hickory? TIA
"Good enough " is never good enough. Take pride in everything you do.

Offline bubby

  • Member
  • Posts: 11,054
Re: an easy board bow build, full draw pics added
« Reply #67 on: July 22, 2016, 10:58:29 am »
If u want to err on the side of caution just go 1/2" thick and tiller to weight
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline Swamp Thang

  • Member
  • Posts: 323
Re: an easy board bow build, full draw pics added
« Reply #68 on: August 26, 2016, 08:01:11 am »
Amazazing by the way....I'm work on a board bow and you've managed to answer all of my questions. THANKS!

Offline bubby

  • Member
  • Posts: 11,054
Re: an easy board bow build, full draw pics added
« Reply #69 on: August 26, 2016, 12:25:08 pm »
😃
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: an easy board bow build, full draw pics added
« Reply #70 on: August 26, 2016, 06:01:57 pm »
Is that your son in those pics bub? Sure don't look like you :)

Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline bubby

  • Member
  • Posts: 11,054
Re: an easy board bow build, full draw pics added
« Reply #71 on: August 26, 2016, 06:47:52 pm »
Is that your son in those pics bub? Sure don't look like you :)



Har har har!!! 😂
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Edge

  • Guest
Re: an easy board bow build, full draw pics added
« Reply #72 on: September 26, 2016, 10:32:10 am »
Thenks for the build along.  I am very new to all of this and appreciate the post.  I've tried my first hickory board bow and followed your instructions as best as I could.  I had what I thought was a nice quick shooting bow at around 40# but after about a few dozen arrows I could hear popping in the limbs.  Thinking it was about to either explode or lift a splinter, I stopped shooting.  I noticed that you didn't scrape the back to "chase the ring"  .  Is this not required on a board bow?  I've built a few maple sapling bows and while they are very light in draw weight, I didn't have to chase the ring.  I would appreciate your comments. thanks again.

Offline bubby

  • Member
  • Posts: 11,054
Re: an easy board bow build, full draw pics added
« Reply #73 on: September 27, 2016, 10:10:43 am »
sent you a pm
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline Knoll

  • Member
  • Posts: 3,016
  • Mikey
Re: an easy board bow build, full draw pics added
« Reply #74 on: September 27, 2016, 09:24:38 pm »
This post oughtta be stickied, imo.
... alone in distant woods or fields, in unpretending sproutlands or pastures tracked by rabbits, even in a bleak and, to most, cheerless day .... .  I suppose that this value, in my case, is equivalent to what others get by churchgoing & prayer.  Hank Thoreau, 1857