Author Topic: Slate point?  (Read 1292 times)

0 Members and 1 Guest are viewing this topic.

Offline smoky#1

  • Member
  • Posts: 98
  • Clayton Porter
Slate point?
« on: November 20, 2012, 01:10:30 am »
Here is my first stone point. It's slate.Is there a way to make slate less brittle?
smoky, Bassett NE

Offline JackCrafty

  • Global Moderator
  • Member
  • Posts: 5,619
  • Sorry Officer, I was just gathering "materials".
Re: Slate point?
« Reply #1 on: November 20, 2012, 03:26:42 am »
Slate comes in many different grades.  Try to find the best grade and use a grinder to shape it and polish it.  Make sure you wear a mask.  The Native Americans made arrowheads from slate that were ground into shape, especially in the Northeast.

Oh yeah, there is no way to make slate less brittle, sorry. :-\
Any critter tastes good with enough butter on it.

Patrick Blank
Midland, Texas
Youtube: JackCrafty, Allergic Hobbit, Patrick Blank

Where's Rock? Public Waterways, Road Cuts, Landscape Supply, Knap-Ins.
How to Cook It?  200° for 24hrs then 275° to 500° for 4hrs (depending on type), Cool for 12hr

Offline smoky#1

  • Member
  • Posts: 98
  • Clayton Porter
Re: Slate point?
« Reply #2 on: November 20, 2012, 02:27:59 pm »
Thank you for the information!
smoky, Bassett NE

Offline jamie

  • Member
  • Posts: 2,387
  • born again pagan ,dirt worshipping heathen
Re: Slate point?
« Reply #3 on: November 20, 2012, 05:26:41 pm »
Grind from point to base when sharpening. It helps
"Man is a tool-using animal. Without tools he is nothing, with tools he is all."

waterbury, ct

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,884
  • Eddie Parker
Re: Slate point?
« Reply #4 on: November 20, 2012, 10:19:19 pm »
I've made several points and Ulus from slate and Jade. They both get real sharp. Try making them a little thicker with more of an edge angle to make them a little less brittle.
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline smoky#1

  • Member
  • Posts: 98
  • Clayton Porter
Re: Slate point?
« Reply #5 on: November 20, 2012, 10:33:53 pm »
Thank you mullet, I'll try that.
smoky, Bassett NE

Offline dlhamblin

  • Member
  • Posts: 33
Re: Slate point?
« Reply #6 on: November 21, 2012, 02:17:04 pm »
I have soaked slate in water-sealer (Thompsons or equivelant) with a lot of success.  However, that doesn't get away from being truly primitive.  If you want to stay primitive try melting pine tar unto the point.  Then, dust it with fine dirt or charcoal to get rid of the sticky feel.