« previous next »
Pages: 1 [2] 3

Author Topic: New feather tool  (Read 6335 times)

0 Members and 1 Guest are viewing this topic.

Offline jeffhalfrack

  • Member
  • Posts: 438
Re: New feather tool
« Reply #15 on: April 18, 2013, 10:31:39 pm »
Nice!  Ill  bet  just a few more think tanks,,,you could make a fletcher out of that? JeffW
Logged

Offline Ozzy

  • Member
  • Posts: 543
Re: New feather tool
« Reply #16 on: April 18, 2013, 10:32:44 pm »
Ill send some thin stuff I have to the classic for you of you want and TRACY don't mind
Logged
THE BEST SUNRISES ARE SEEN 20 FEET UP A TREE.

Offline richardzane

  • Member
  • Posts: 500
  • active Wyandot tribal member
    • richardzanesmith.wordpress.com
Re: New feather tool
« Reply #17 on: April 18, 2013, 10:34:47 pm »
enjoy seeing these kinds of home-tech inventions!
Logged
when i'm working on things my ancestors worked, singing the songs my ancestors sang, dancing the same dances, speaking the same language, only then  I feel connected to the land, THIS land, where my ancestors walked for thousands of years...

Offline TRACY

  • Member
  • Posts: 4,523
Re: New feather tool
« Reply #18 on: April 18, 2013, 10:41:23 pm »
Don't mind at all. It seems like wide band saw blade sections would work for the double cutter.


Tracy
Logged
It is what it is - make the most of it!    PN500956

Offline lostarrow

  • Member
  • Posts: 1,348
Re: New feather tool
« Reply #19 on: April 18, 2013, 10:42:27 pm »
Consider that idea stolen! love it! lets see the one for thinning the quill. I've become adept at stripping Turkey quills , but Goose aren't as co-operative.
Logged

Offline osage outlaw

  • Member
  • Posts: 11,952
Re: New feather tool
« Reply #20 on: April 18, 2013, 10:46:17 pm »
Quote from: Ozzy on April 18, 2013, 10:32:44 pm
Ill send some thin stuff I have to the classic for you of you want and TRACY don't mind

It has to be real thin metal.  What I'm using now is .040"  Do you have anything like that?  I got a call today about some more feathers so I can send back some more RW's
Logged
I started out with nothin' and I still got most of it left

Offline osage outlaw

  • Member
  • Posts: 11,952
Re: New feather tool
« Reply #21 on: April 18, 2013, 10:48:20 pm »
Quote from: lostarrow on April 18, 2013, 10:42:27 pm
Consider that idea stolen! love it! lets see the one for thinning the quill. I've become adept at stripping Turkey quills , but Goose aren't as co-operative.

It is just two scrap pieces of 1x boards attached with some small hinges.  I sandwich the feather between the boards with the quill sticking out and run it across my belt sander for just a second or two.  I can post a pic of it if you want me to.
Logged
I started out with nothin' and I still got most of it left

Offline Ozzy

  • Member
  • Posts: 543
Re: New feather tool
« Reply #22 on: April 18, 2013, 10:56:17 pm »
I got some really thin bandsaw blade stuff in a tread with Greg that should work I thank
Logged
THE BEST SUNRISES ARE SEEN 20 FEET UP A TREE.

Offline osage outlaw

  • Member
  • Posts: 11,952
Re: New feather tool
« Reply #23 on: April 18, 2013, 11:00:28 pm »
I think I have the same stuff that Greg has.  I can use that.  Keep your stuff and make some trade points out of it Ozzy.     
Logged
I started out with nothin' and I still got most of it left

Offline lostarrow

  • Member
  • Posts: 1,348
Re: New feather tool
« Reply #24 on: April 19, 2013, 12:09:35 am »
Damn! That's what I'm doing already. I was hoping you had some new magic for that one that involves less sneezing. ;) . Thanks for the other though . So simple , so ingenious.
Logged

Offline osage outlaw

  • Member
  • Posts: 11,952
Re: New feather tool
« Reply #25 on: April 19, 2013, 12:37:32 am »
I have been getting better results sanding them on my little 1" belt sander instead of the 4".  I hook a shopvac to the dust port and use a mask.  You don't want to breathe feather dust.
Logged
I started out with nothin' and I still got most of it left

Offline lostarrow

  • Member
  • Posts: 1,348
Re: New feather tool
« Reply #26 on: April 19, 2013, 12:55:23 am »
I agree!
Logged

Offline vyadha

  • Member
  • Posts: 71
Re: New feather tool
« Reply #27 on: April 19, 2013, 02:50:41 am »
Cant ya just point the opposite wing feathers the opposite way in the same jig?
Logged

Offline bobnewboy

  • Member
  • Posts: 329
  • https://www.flickr.com/photos/bob_d14/
    • The Company of Sixty Field Archers
Re: New feather tool
« Reply #28 on: April 19, 2013, 08:23:03 am »
Ooh, I like that.  I'll have to make me one.  Thanks.
Logged
"The Englishman takes great pride in his liberty. He values this gift more than all the joys of life, and would sacrifice everything to retain it. The populace would have you understand there is no country in the world where such perfect freedom can be enjoyed, as in England!" Frenchman, London 1719

Offline osage outlaw

  • Member
  • Posts: 11,952
Re: New feather tool
« Reply #29 on: April 19, 2013, 08:24:34 am »
vyadha, you can but when you lower the spacer it goes against the grain of the feather and bunches it up.  As simple as it is to build I thought it would be easier to make a double sided one.


I forgot to mention that I used a very thin washer in between the back and the spacer.
Logged
I started out with nothin' and I still got most of it left
Pages: 1 [2] 3
« previous next »