Author Topic: BBI elb, and a maple PH hickory trilam elb... (probably picture heavy)  (Read 5820 times)

0 Members and 1 Guest are viewing this topic.

Offline toomanyknots

  • Member
  • Posts: 3,132
Heres a couple english longbows I have made recently. First one is a bamboo backed ipe, 72 3/4" nock to nock, and 67# @ 28", or 80# @ 32".























Second one is a hard maple backed, purple heart core, and hickory belly trilam. 65 7/8" from nock to nock, and 40# @ 28". The strike plate is a buffalo horn overlay. Initially I made this one for Thesquirrelslinger on here as he was wantin one of my elbs and I told him I'd make him one, but it came out way too light as he was wanting 60# - 65# or so. So I will have to go back to the drawing board and whip him up another real quick, :).





















( Yes I have somehow lost all my hair and acquired a shirt that is obviously 5 sizes to big for me from the last bow to this one, I am as flabbergasted as you are, :). )








« Last Edit: June 16, 2013, 10:23:57 am by toomanyknots »
"The way of heaven is like the bending of a bow-
 the upper part is pressed down,
 the lower part is raised up,
 the part that has too much is reduced,
 the part that has too little is increased."

- Tao Te Ching, 77, A new translation by Victor H. Mair

Offline bushboy

  • Member
  • Posts: 2,256
Killer nocks,nice job x 2!
Some like motorboats,I like kayaks,some like guns,I like bows,but not the wheelie type.

Offline Cardboard_Duck

  • Member
  • Posts: 282
  • Winter Haven, FL
Nice! I really dig that BBI
>>>---------->

Offline Joec123able

  • Member
  • Posts: 1,769
Wow I'm really liking that ipe and bamboo beautful job !
I like osage

Offline bubby

  • Member
  • Posts: 11,054
great looking bows but what the heck happened to you >:D
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline missilemaster

  • Member
  • Posts: 1,172
Very,very,very cool! 8)
All men die,  few men ever really live.

Real men love Jesus.

Offline osage outlaw

  • Member
  • Posts: 11,952
nice bows and haircut
I started out with nothin' and I still got most of it left

Offline toomanyknots

  • Member
  • Posts: 3,132
Haha, thanks guys!  ;D
"The way of heaven is like the bending of a bow-
 the upper part is pressed down,
 the lower part is raised up,
 the part that has too much is reduced,
 the part that has too little is increased."

- Tao Te Ching, 77, A new translation by Victor H. Mair

Offline Zion

  • Member
  • Posts: 783
  • The blacksmith's mare walks barefoot
Dang those are some really nice bows!
The secret of life is learning to make your own luck.

Offline dmc

  • Member
  • Posts: 136
Like, like like!! Very nice job. Love the nocks.
Carpe Diem- Seize the Day!!

Offline Cameroo

  • Member
  • Posts: 1,579
    • Cam's Stuff
Your bows just keep getting better buddy :)  Very nice work on both of those.  Your tillering is bang-on, the glue joints look perfect, and your finishing details are top notch!

mikekeswick

  • Guest
I'm impressed. Lovely bows.
the only thing I would do differently is to make sure the edges of the bamboo were a bit more rounded going into the nocks. It's ok to have the last inch or two completely round to blend into the nocks....but i'm picking faults on otherwise perfect bows.
 :) :) :)

Offline lesken2011

  • Member
  • Posts: 2,063
  • Kenny
Both bows are SWEET! Cam is right about those glue lines on the tri-lam especially!! :o
For by grace you have been saved through faith, and that not of yourselves; it is the gift of God, not of works, lest anyone should boast.

Ephesians 2:8-9

Kenny from Mississippi, USA

Offline dbb

  • Member
  • Posts: 745
Beautiful finish and bends on those,just hope i manage to get the ash elb i work on nearly as good!
great looking bows but what the heck happened to you >:D
I looks like one of those dreaded drive by trimmer attacks  ;D
It's better to ask and look like a fool than not to ask and remain one...

Offline SLIMBOB

  • Member
  • Posts: 3,759
  • Deplorable Slim
Like them both TMK,especially the BBI.  Tiller and finish look great.  Got a good piece of Ipe, and a BBI is on the menu for me.
Liberty, In God We Trust, E Pluribus Unum.  Distinctly American Values.