« previous next »
Pages: [1]

Author Topic: Question on hafting  (Read 2006 times)

0 Members and 1 Guest are viewing this topic.

Offline yebon

  • Member
  • Posts: 28
Question on hafting
« on: August 13, 2013, 10:27:04 am »
I am making a basic spear with a deer leg bone tip.  I have it the way i want but am wondering what i should wrap it with.  The wood is an elm sapling i cut down and i made a notch in to put the point on.  It is pretty stiff so i will need something fairly strong.  It is starting to split down farther than i want it so i also need something to wrap so it does not split farther. I am very new at this and any help is welcomed. 

Thanks
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,527
Re: Question on hafting
« Reply #1 on: August 13, 2013, 10:38:51 am »
If you have it use pitch glue to set the point and rawhide to wrap it.
Cut the rawhide in 1/4" to 1/2" strips and wet and stretch it then wrap it near the point and back down the handle a bit. The rawhide will shrink as it dries and really bind the point and shaft. It will alo prevent the shaft from splitting.
« Last Edit: August 13, 2013, 12:27:24 pm by Pat B »
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Outbackbob48

  • Member
  • Posts: 2,752
Re: Question on hafting
« Reply #2 on: August 13, 2013, 10:51:15 am »
Just getting ready to push post but Pat's got ya covered. Let's see some pics when your finished.  Bob
Logged

Offline yebon

  • Member
  • Posts: 28
Re: Question on hafting
« Reply #3 on: August 13, 2013, 02:01:47 pm »
Thank you for the info.  I will get the raw hide and get it done.  I have gathered the pitch and the charcoal and a little beeswax so i just need to make the pitch glue.  I will post pics as soon as i get it set and wrapped.

Thank you so much for your help 
Logged
Pages: [1]
« previous next »