Author Topic: Attempted Grum-along FAILED!!!  (Read 7608 times)

0 Members and 1 Guest are viewing this topic.

Offline PatM

  • Member
  • Posts: 6,737
Attempted Grum-along FAILED!!!
« on: April 16, 2014, 10:53:09 pm »
I will be attempting a build-along featuring a replica Grumley Deerslayer.  I will be substituting Elm for Osage because I want it to be as good as possible.  >:D
 I just cut a piece of elm exactly 63 inches long and split it in half, preserving the half with the flattest side for the potential bow.
 I am going to try to bend very thick tips to attain the classic static tips formed from a single piece rather than adding laminations to thicken the tips in order to form the brush nocks.
 Here is my selected Elm trunk before and after splitting. Check out the lucky final growth ring. Thickest of the bunch!




« Last Edit: September 22, 2015, 10:22:14 am by PatM »

Offline JW_Halverson

  • Member
  • Posts: 11,847
Re: Attempted Grum-along
« Reply #1 on: April 16, 2014, 10:54:41 pm »
Ambitious.  Please continue.
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.

Offline bubby

  • Member
  • Posts: 11,054
Re: Attempted Grum-along
« Reply #2 on: April 16, 2014, 11:13:28 pm »
Yep, keep it coming pat
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline adb

  • Member
  • Posts: 5,339
Re: Attempted Grum-along
« Reply #3 on: April 16, 2014, 11:19:42 pm »

Offline Wiley

  • Member
  • Posts: 182
Re: Attempted Grum-along
« Reply #4 on: April 16, 2014, 11:21:03 pm »
I was thinking about how cool it would be to carve the brush knocks from one piece of wood. Eager to see how you get those bends with the thick wood.

Don Case

  • Guest
Re: Attempted Grum-along
« Reply #5 on: April 16, 2014, 11:23:52 pm »
Are you going to bend it while it's green?

Offline Badly Bent

  • Member
  • Posts: 3,750
Re: Attempted Grum-along
« Reply #6 on: April 16, 2014, 11:24:30 pm »
I'll watch this one. Gonna be a cool project, nice stave.
I ain't broke but I'm badly bent.

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,884
  • Eddie Parker
Re: Attempted Grum-along
« Reply #7 on: April 16, 2014, 11:38:43 pm »
Ambitious.  Please continue.
tt, always stirring. ;)
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline mwosborn

  • Member
  • Posts: 806
  • Mitch Osborn
Re: Attempted Grum-along
« Reply #8 on: April 16, 2014, 11:43:15 pm »
Looking forward.  That is one straight piece of elm.
Enjoy the hunt!  Mitch

Offline IdahoMatt

  • Member
  • Posts: 2,093
Re: Attempted Grum-along
« Reply #9 on: April 16, 2014, 11:48:20 pm »
Very cool idea.  I'll be waiting to see what comes next.

Offline zenart

  • Member
  • Posts: 115
Re: Attempted Grum-along
« Reply #10 on: April 16, 2014, 11:52:44 pm »
I've never seen elm logs before. Is this stave typical of elm? So straight and true.
Huntington Beach, CA … there's no trees here but we do have lumber yards.

Offline PatM

  • Member
  • Posts: 6,737
Re: Attempted Grum-along
« Reply #11 on: April 17, 2014, 12:56:38 am »
Elm is very prone to growing a long clean trunk before branching. Particularly when it is coming up through a canopy.
 You still have to look for a perfect trunk that is say 7 feet of clear wood with no branches or recently grown over knots  and capable of being quartered.
 I see many trees with at least one clear side but I'd rather get at least 2 staves from a tree before cutting.
 Definitely the number one tree up here for reliably supplying clear wood with a minimum of time looking for it. Even with the blight taking its share. Saw two trees today that were flawless except for being  dead and rotten. >:( On the plus side I found 3-4 more perfect specimens that are healthy.
 Formerly the tree attained a typical tropical tree form. A buttressed trunk with a long clean bole and a vase shaped  top. Still see plenty of medium sized trees that show promise of reaching those dimensions again.
 I should take some pics of those trees.
 
 I will be bending the tips while the wood is semi-green. It seems to be even more pliable then and require less heating.

Offline zenart

  • Member
  • Posts: 115
Re: Attempted Grum-along
« Reply #12 on: April 17, 2014, 01:09:07 am »
Thnx for the info Pat.. I'll be watchin' this one closely.
Huntington Beach, CA … there's no trees here but we do have lumber yards.

Offline bubbles

  • Member
  • Posts: 932
  • PM110769
Re: Attempted Grum-along
« Reply #13 on: April 17, 2014, 01:11:40 am »
Excited for this - let me know if you ever need help cutting those elms Pat.  :)

Offline PatM

  • Member
  • Posts: 6,737
Re: Attempted Grum-along
« Reply #14 on: April 17, 2014, 01:18:34 am »
  Doing all the cutting myself keeps me young  ;D  I'll make sure I get you a stave though.