« previous next »
Pages: 1 [2]

Author Topic: No fletching  (Read 5040 times)

0 Members and 1 Guest are viewing this topic.

Don Case

  • Guest
Re: No fletching
« Reply #15 on: May 29, 2014, 03:19:19 pm »
Thanks Pat, I guess a lead tip is the only answer for reducing spine on a cane arrow?
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,494
Re: No fletching
« Reply #16 on: May 29, 2014, 03:23:29 pm »
Once the rind is removed you can scrape the shaft to reduce spine but in the case of these two arrows I will add more tip weight. Extra length helps to reduce spine also by 5# per inch.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Don Case

  • Guest
Re: No fletching
« Reply #17 on: May 29, 2014, 04:12:41 pm »
Is it necessary to scrape all around the arrow or can you just run the scraper up the two sides. Reduce the spine horizontally and not vertically is what I'm trying to say.
Logged

gutpile

  • Guest
Re: No fletching
« Reply #18 on: May 29, 2014, 04:16:14 pm »
just foreshaft your over spined arrows..LOL... heck you may find they become your favorite... dont be afraid of the FORESHAFT..lol...
Logged

gutpile

  • Guest
Re: No fletching
« Reply #19 on: May 29, 2014, 04:17:25 pm »
plus I have also found out cane cane run different spines from one side to the next too...no doubt...
Logged

Offline stickbender

  • Member
  • Posts: 3,828
Re: No fletching
« Reply #20 on: June 02, 2014, 04:11:14 pm »

    Ooooh naked arrows!!  ...... :) :) ::) >:D


                                 Wayne
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,494
Re: No fletching
« Reply #21 on: June 02, 2014, 06:30:39 pm »
 Most shoot shafts and cane have a stiff side and that side goes against the bow for best arrow flight.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC
Pages: 1 [2]
« previous next »