Author Topic: New Guy Introductions  (Read 3350 times)

0 Members and 1 Guest are viewing this topic.

Offline jasonoflivingston

  • Member
  • Posts: 25
New Guy Introductions
« on: July 30, 2014, 11:01:20 pm »
So, just as with Paleoplanet, I have been lurking here for a while so I figured that I would finally stick my nose in.  I started to pick up bowmaking six or seven years ago, but shortly after, a job change and relocation put things on hold until a couple of months ago when I felt inspired to do something with a white ash stave in my closet.  Ever since, I have been digging through forums and the Bowyer's Bibles for hints, tips, and ideas.  In that light, just as with the Paleo guys, I want to say thanks for being so open about bow making.  It has made learning a great experience!   

And, finally, since no introduction is complete without pics, here are some pictures of my recently completed red oak bow.  It is 71" ntn and 58# @ 30".  The handle and limb tips are "butcher block" style end grain cuts of maple and walnut (from one of my dad's old projects). 


Stringing and exercising it a bit before breaking it in and applying a finish:



After break-in and finishing:







Offline JW_Halverson

  • Member
  • Posts: 11,915
Re: New Guy Introductions
« Reply #1 on: July 30, 2014, 11:08:39 pm »
Now THAT is just plain showing off!


I can respect that!
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.

Offline autologus

  • Member
  • Posts: 1,092
Re: New Guy Introductions
« Reply #2 on: July 30, 2014, 11:13:01 pm »
Wow that is a very pretty bow and the tiller looks great. Oh and welcome aboard.

Grady
Proud Hillbilly from Arkansas.

Offline 4giveme

  • Member
  • Posts: 129
Re: New Guy Introductions
« Reply #3 on: July 30, 2014, 11:15:21 pm »
Hi,
Welcome out of the shadows. ;) if you liked the BB while you were lurking, you are going to love interacting with the many fine bowyers of the PA world. Which by the looks of that fine bow you posted you will fit right in. Really love the looks of that handle. Nice work.
God bless,
Tommy
God bless and thanks,
Tommy

"There are only two things we can't change, yesterday and tomorrow. So let's live in the moment and make the best choices we can right now."

Unknown author.

Offline Lefty8917

  • Member
  • Posts: 83
Re: New Guy Introductions
« Reply #4 on: July 30, 2014, 11:20:52 pm »
Welcome back to the addiction. That handle is crazy unique. I wouldn't have even thought of something like that. Great work

Offline IdahoMatt

  • Member
  • Posts: 2,093
Re: New Guy Introductions
« Reply #5 on: July 30, 2014, 11:28:54 pm »
Welcome to PA

Offline IdahoMatt

  • Member
  • Posts: 2,093
Re: New Guy Introductions
« Reply #6 on: July 30, 2014, 11:32:28 pm »
Almost forgot to comment on the bow.  Great job.  I like your glue lines, very clean joinery

Offline jasonoflivingston

  • Member
  • Posts: 25
Re: New Guy Introductions
« Reply #7 on: July 30, 2014, 11:40:48 pm »
Thanks guys.  I haven't made too many bows yet, despite having starting this adventure so long ago.  I am just glad this one turned out ok.  I think it was probably a bit ambitious for my level of skill.  The butcher block parts are something that I cannot take full credit for as my dad and his extensive workshop had a hand in creating the patterns before I applied it to the bow. 

Offline Swampman

  • Member
  • Posts: 1,046
  • Primitive Archer subscription number PM109299
Re: New Guy Introductions
« Reply #8 on: July 30, 2014, 11:59:27 pm »
Very creative use of what you have laying around.  Welcome..

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,609
Re: New Guy Introductions
« Reply #9 on: July 31, 2014, 12:11:40 am »
Beautiful bend on your bow. Well done.   Welcome to PA. Looking forward to more of your work.
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Will H

  • Member
  • Posts: 2,120
Re: New Guy Introductions
« Reply #10 on: July 31, 2014, 07:55:13 am »
Welcome to PA! Nice bend and I really like the butcher blocks :) Like pat said, I'm lookin forward to seeing more of your work.
Proud Member of Twin Oaks Bowhunters
           Clarksville, Tennessee

   "Middle Tennessee is the place to be"

Offline Gsulfridge

  • Member
  • Posts: 1,573
Re: New Guy Introductions
« Reply #11 on: July 31, 2014, 08:08:38 am »
Love that handle. Nice work.  Welcome aboard.
Greg Sulfridge, Lafollette, TN

Offline SLIMBOB

  • Member
  • Posts: 3,759
  • Deplorable Slim
Re: New Guy Introductions
« Reply #12 on: July 31, 2014, 08:19:22 am »
Welcome to PA.  Sweet bend on the bow.
Liberty, In God We Trust, E Pluribus Unum.  Distinctly American Values.

Offline Aaron H

  • Member
  • Posts: 3,437
Re: New Guy Introductions
« Reply #13 on: July 31, 2014, 09:35:20 am »
Sweet bow, welcome

Offline jasonoflivingston

  • Member
  • Posts: 25
Re: New Guy Introductions
« Reply #14 on: July 31, 2014, 09:38:55 am »
Again, thanks guys for the comments and the warm welcome.  Regarding the bend of the bow, the tillering and shaping of the grip area was the real challenge because of the combination of a working grip and the end grain butcher block lamination.