« previous next »
Pages: [1]

Author Topic: dimensions for hickory backed ERC  (Read 2980 times)

0 Members and 1 Guest are viewing this topic.

Offline autologus

  • Member
  • Posts: 1,092
dimensions for hickory backed ERC
« on: August 16, 2014, 09:10:19 pm »
I am going to make a hickory backed ERC English long bow about 45 to 50 pounds what do you guys think I should start with on dimensions?

Grady
Logged
Proud Hillbilly from Arkansas.

Offline adb

  • Member
  • Posts: 5,339
Re: dimensions for hickory backed ERC
« Reply #1 on: August 17, 2014, 11:29:04 pm »
You might have better luck posting this in the regular bows forum.
Logged

Offline M-P

  • Member
  • Posts: 876
  • PA731115
    • Traveling Surgery
Re: dimensions for hickory backed ERC
« Reply #2 on: August 18, 2014, 01:06:08 am »
Howdy,  I've made one bow with this combination.  It's a pyramid, flat-limbed design, so not quite what you're looking for.  None the less 72" long tip-tip.  1.5 inches wide out of the fades and 3/8 wide at the nocks.  40# @ 28".  To get a higher crowned limb you'd need to start a little narrower.
Logged
"A man should make his own arrows."   Omaha proverb   

"There are three kinds of men. The one that learns by reading. The few who learn by observation. The rest of them have to pee on the electric fence for themselves."    Will Rogers

Offline autologus

  • Member
  • Posts: 1,092
Re: dimensions for hickory backed ERC
« Reply #3 on: August 18, 2014, 10:12:03 am »
Thanks for the reply that should help tremendously.

Grady
Logged
Proud Hillbilly from Arkansas.
Pages: [1]
« previous next »