Author Topic: Harvesting my first staves (Osage)  (Read 4888 times)

0 Members and 1 Guest are viewing this topic.

Offline lenador

  • Member
  • Posts: 193
Re: Harvesting my first staves (Osage)
« Reply #15 on: September 30, 2014, 02:59:19 pm »
Here is what I ended up with. I've got the ends sealed and all. The shorter on I hope to make either a short bow for practice and or billets. The longer o es I may have been able to split smaller but being such a nice piece of wood and my first time I got nervous. Now on to the walking sticks, sapling bow and then to peel the backs of the staves and seal them.
Failure isn't a loss unless you cease to move forward from it.

Offline osage outlaw

  • Member
  • Posts: 11,952
Re: Harvesting my first staves (Osage)
« Reply #16 on: September 30, 2014, 04:51:38 pm »
Nice haul!  How long are the shorter staves?  Hang on to them.  They look like they might be good pieces for short sinew backed bows.
I started out with nothin' and I still got most of it left

Offline lenador

  • Member
  • Posts: 193
Re: Harvesting my first staves (Osage)
« Reply #17 on: September 30, 2014, 05:07:18 pm »
The short ones are between 50-52" long. Not as straight as the long ones.
Failure isn't a loss unless you cease to move forward from it.

Offline TimBo

  • Member
  • Posts: 1,030
Re: Harvesting my first staves (Osage)
« Reply #18 on: September 30, 2014, 05:45:35 pm »
Nice work!  Definitely better not to get greedy...you can always split one again later, especially if you find that you like d bows since they can be narrower. 

Offline lenador

  • Member
  • Posts: 193
Re: Harvesting my first staves (Osage)
« Reply #19 on: September 30, 2014, 10:39:44 pm »
Yeah that's what I figured too.
There is seven long ones there. I'm hoping to try to trade one for an already seasoned stave.
Failure isn't a loss unless you cease to move forward from it.

Offline Aaron H

  • Member
  • Posts: 3,437
Re: Harvesting my first staves (Osage)
« Reply #20 on: September 30, 2014, 10:44:43 pm »
beautiful piece of osage.

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 31,767
  • if you have to ask you wouldn't understand ,Tenn.
Re: Harvesting my first staves (Osage)
« Reply #21 on: October 01, 2014, 05:30:39 am »
That is some beautiful looking wood,nice haul .  :)
   Pappy
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline lenador

  • Member
  • Posts: 193
Re: Harvesting my first staves (Osage)
« Reply #22 on: October 01, 2014, 09:03:43 am »
Thanks guys. Now I just have to put it away somewhere and wait it out to perfection. Will keeping these in the winter ruin them? It gets below zero here and if its like last year it will be way below zero often. And then I'm in the shop about half the week so the temp will be going up when I use my wood burner and down when I'm not.
Failure isn't a loss unless you cease to move forward from it.

Offline Dean Marlow

  • Member
  • Posts: 531
Re: Harvesting my first staves (Osage)
« Reply #23 on: October 01, 2014, 07:00:52 pm »
Freezing temperatures will not hurt them. Keeping  them out of the weather outside is the main thing.

Offline Benedikt

  • Member
  • Posts: 95
Re: Harvesting my first staves (Osage)
« Reply #24 on: October 03, 2014, 09:54:02 am »
What a nice wood!
I love Osage :D
What a pitty that i doesn't grow here ::)
A dream is not reality, but who is to say which is which?