« previous next »
Pages: [1]

Author Topic: Buffing Compound color for Horn Nocks  (Read 3200 times)

0 Members and 1 Guest are viewing this topic.

Offline VicNova

  • Member
  • Posts: 238
Buffing Compound color for Horn Nocks
« on: September 29, 2014, 11:42:08 pm »
I just buffed a horn nock with jewelers rouge buffing compound. It gave it an ugly red/brown coating and ruined the wheel.

What color buffing compound  will go good on a black buffalo horn and not leave a layer of color?

I was thinking white or black but I am not sure. 

Logged
Ypsilanti,  Michigan

Online Pat B

  • Administrator
  • Member
  • Posts: 37,491
Re: Buffing Compound color for Horn Nocks
« Reply #1 on: September 30, 2014, 12:13:16 am »
I just use fine sand paper and the horn gets a nice shine with the Tru-Oil finish.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline bubby

  • Member
  • Posts: 11,054
Re: Buffing Compound color for Horn Nocks
« Reply #2 on: September 30, 2014, 12:28:13 am »
I use the white, but u cant use a wheel that you used on metal, like brass, it gets black everywhere
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline Weylin

  • Member
  • Posts: 2,296
Re: Buffing Compound color for Horn Nocks
« Reply #3 on: September 30, 2014, 01:04:43 am »
Quote from: Pat B on September 30, 2014, 12:13:16 am
I just use fine sand paper and the horn gets a nice shine with the Tru-Oil finish.

This is what I do
Logged

Offline bubby

  • Member
  • Posts: 11,054
Re: Buffing Compound color for Horn Nocks
« Reply #4 on: September 30, 2014, 01:09:50 am »
I use a file and then scrape it to get the marks out, then fine sandpaper,  then buffing wheel
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline bobnewboy

  • Member
  • Posts: 329
  • https://www.flickr.com/photos/bob_d14/
    • The Company of Sixty Field Archers
Re: Buffing Compound color for Horn Nocks
« Reply #5 on: September 30, 2014, 05:19:49 am »
Hi Guys,  when using buffalo horn I use ordinary T-Cut car paint finisher.  Cheap and effective, and doesn't leave any colour.
Logged
"The Englishman takes great pride in his liberty. He values this gift more than all the joys of life, and would sacrifice everything to retain it. The populace would have you understand there is no country in the world where such perfect freedom can be enjoyed, as in England!" Frenchman, London 1719

Offline Del the cat

  • Member
  • Posts: 8,291
    • Derek Hutchison Native Wood Self Bows
Re: Buffing Compound color for Horn Nocks
« Reply #6 on: September 30, 2014, 09:17:47 am »
I use two bars from a company in the UK who specialise in horn and related products, they sell it by the half bar.
Vonax and Lustre.
Vonax is brown an slightly coarser, Lustre is creamy white and gives a mirror finish.
Google will bring up results for them.
Del
« Last Edit: September 30, 2014, 09:58:18 am by Del the cat »
Logged
Health warning, these posts may contain traces of nut.

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Buffing Compound color for Horn Nocks
« Reply #7 on: September 30, 2014, 09:23:45 am »
Try 0000 steel wool. Looks like glass.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline JW_Halverson

  • Member
  • Posts: 11,850
Re: Buffing Compound color for Horn Nocks
« Reply #8 on: September 30, 2014, 01:56:33 pm »
Are you sure that is the buffing compound and not burnt horn???

Horn is protein based and if you raise the temp too much it will burn.  Buffing horn requires a light touch, after all, it is much softer than metal or even paint. 

If it is buffing compound on the horn, you should be able to scrape it off with a thumbnail.  If it is burnt, you will have to scrape down thru the horn to fresh material underneath.  I darn near ruined a beautiful powderhorn I had spent 30 hours carving when I kept pushing for a more lustrous shine! 
Logged
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.

Offline bradsmith2010

  • Member
  • Posts: 5,187
Re: Buffing Compound color for Horn Nocks
« Reply #9 on: September 30, 2014, 02:38:00 pm »
steel wool should do it
Logged

Offline Aaron H

  • Member
  • Posts: 3,437
Re: Buffing Compound color for Horn Nocks
« Reply #10 on: October 01, 2014, 08:13:54 am »
I use white buffing compound. Like JW said though, a light touch is all that is needed.
Logged
Pages: [1]
« previous next »