« previous next »
Pages: [1]

Author Topic: sinew  (Read 1342 times)

0 Members and 1 Guest are viewing this topic.

Offline bigfish

  • Member
  • Posts: 28
sinew
« on: October 22, 2014, 07:12:52 pm »
just wanted to know if someone has ever made an all sinew bow
Logged

Offline Eric Krewson

  • Member
  • Posts: 5,311
Re: sinew
« Reply #1 on: October 22, 2014, 07:29:30 pm »
I know of none that have ever been made and from handling a lot of sinew I suspect it would be impossible. You need a core material.
Logged

Offline 4giveme

  • Member
  • Posts: 129
Re: sinew
« Reply #2 on: October 22, 2014, 10:11:36 pm »
Hi,
Good question, a all sinew bow would be impractical because while it is very good in tinsel strength it has virtually no compression streanth. That's where the horn comes in or some other core that is good in compression.
Logged
God bless and thanks,
Tommy

"There are only two things we can't change, yesterday and tomorrow. So let's live in the moment and make the best choices we can right now."

Unknown author.

Offline loefflerchuck

  • Member
  • Posts: 1,126
    • www.heartwoodbows.com
Re: sinew
« Reply #3 on: October 22, 2014, 11:25:04 pm »
Ha! I had a sheephorn bow break that was 1/2 sinew. Just for kicks I pulled the sinew off whole. The tips almost touched with reflex. I was able to stick a string on it and it drew about 12-15 pounds. Probably had about a 40 yard cast. There is no reason to try and prove us wrong. A sinew bow would not work
Logged
Pages: [1]
« previous next »