« previous next »
Pages: 1 [2] 3

Author Topic: a stave from mullet  (Read 11810 times)

0 Members and 1 Guest are viewing this topic.

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,491
Re: a stave from mullet
« Reply #15 on: October 28, 2014, 09:53:07 pm »
Is there a hinge at that area?
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline bubby

  • Member
  • Posts: 11,054
Re: a stave from mullet
« Reply #16 on: October 28, 2014, 10:24:48 pm »
without taking it down how do you know it only went 2 rings down? ???
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline Tyke

  • Member
  • Posts: 343
Re: a stave from mullet
« Reply #17 on: October 28, 2014, 11:21:05 pm »
I scraped it down two rings just where the crack was restrung it at about 2" brace and checked to see if it was cracked anymore
Logged
why buy it when you can build it

Offline Tyke

  • Member
  • Posts: 343
Re: a stave from mullet
« Reply #18 on: October 28, 2014, 11:22:58 pm »
No there wasnt a hinge pat but theres a tiny knot
Logged
why buy it when you can build it

Offline bubby

  • Member
  • Posts: 11,054
Re: a stave from mullet
« Reply #19 on: October 28, 2014, 11:31:29 pm »
well tyke that's what I was thinking u did, i'd take the rest of the back down, and I don't really like chasing rings
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline Tyke

  • Member
  • Posts: 343
Re: a stave from mullet
« Reply #20 on: October 28, 2014, 11:38:25 pm »
You must need a good scraper then bubby ;D
Logged
why buy it when you can build it

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,491
Re: a stave from mullet
« Reply #21 on: October 28, 2014, 11:50:45 pm »
What made it crack? Osage doesn't crack in tenion just cause.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Tyke

  • Member
  • Posts: 343
Re: a stave from mullet
« Reply #22 on: October 29, 2014, 12:08:36 am »
I honestly dont know we did hit freezing last night and i left it in my shop over night
Logged
why buy it when you can build it

Offline bubby

  • Member
  • Posts: 11,054
Re: a stave from mullet
« Reply #23 on: October 29, 2014, 12:12:08 am »
I've got a khalverson scraper they don't get any better ;)
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,491
Re: a stave from mullet
« Reply #24 on: October 29, 2014, 12:15:55 am »
Tyke, freezing doesn't matter, too dry could.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline jeffp51

  • Member
  • Posts: 1,640
Re: a stave from mullet
« Reply #25 on: October 29, 2014, 12:16:44 am »
seems to me that that little knot has something to do with it. someone with more experience would have to say why, but the crack is too close to the knot to be coincidence.  Bummer Tyke, hope you can recover from it.
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,491
Re: a stave from mullet
« Reply #26 on: October 29, 2014, 12:23:47 am »
The crack is coming off the knot but why? Most osage bows have pins and/or knots in them. Knots check(drying cracks following grain) but osage doesn't crack without a reason. Even taking the top off of the pin shouldn't cause a crack like that.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,885
  • Eddie Parker
Re: a stave from mullet
« Reply #27 on: October 29, 2014, 01:58:23 pm »
You violated the little pin knot. Super Glue in the crack and then rawhide back it. Quick and simple.
Logged
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline Tyke

  • Member
  • Posts: 343
Re: a stave from mullet
« Reply #28 on: October 29, 2014, 02:06:48 pm »
Yes sir eddie
Logged
why buy it when you can build it

Offline Parnell

  • Member
  • Posts: 5,551
Re: a stave from mullet
« Reply #29 on: October 29, 2014, 05:22:36 pm »
Good practice to always leave an extra growth ring as a little "island" above a pin knot so that doesn't happen.  I made that mistake once on my first Osage stave.  Crack didn't develop for about a year, then all of a sudden...surprise!
Good luck.
Logged
1’—>1’
Pages: 1 [2] 3
« previous next »