« previous next »
Pages: [1]

Author Topic: vine maple bow  (Read 1860 times)

0 Members and 1 Guest are viewing this topic.

Offline fiddler49

  • Member
  • Posts: 163
vine maple bow
« on: May 29, 2015, 03:43:13 am »
A friend gave me a vine maple stave about 10 years ago and I finally got around to making it into a bow. It had about 4 inches of de flex and some twist, which I removed most of with a heat gun. Bark was left on so I had to grind it off with angle grinder. It is 64 inches long, bend in the handle with simple side nocks, pulls about 45 lbs. I stained it with a blue Rite dye and rubbed some paste wax over it. Shot it this week end at our trad Memorial day gathering, 40 3-D targets. I probably shot 3 to 4 arrows at every target. The bow held up fine even drawing it my 31.5 inches. cheers fiddler49























 there is still 2 inches of de-flex





I did another round of heat gun and removed the de-flex


no hand tools were harmed or used on this bow!!! lol
Logged

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 31,767
  • if you have to ask you wouldn't understand ,Tenn.
Re: vine maple bow
« Reply #1 on: May 29, 2015, 04:37:55 am »
Looks like a shooter to me. :)
   Pappy
Logged
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline bow101

  • Member
  • Posts: 2,235
Re: vine maple bow
« Reply #2 on: May 29, 2015, 09:22:39 am »
Tiller looks good, thats quite a draw ya got there.
Logged
"The privilege of a lifetime is being who you are."  Joseph Campbell

Offline tattoo dave

  • Member
  • Posts: 1,541
  • Rockford, MI
Re: vine maple bow
« Reply #3 on: May 29, 2015, 07:49:29 pm »
Nice lookin bow! Never messed with vine maple. Keep up the good work!

Tattoo dave
Logged
Rockford, MI

Offline Gordon

  • Member
  • Posts: 3,299
Re: vine maple bow
« Reply #4 on: May 30, 2015, 02:26:29 pm »
Frankly I'm surprised it has held together this long after taking a grinder to the back. Good luck.
Logged
Gordon
Pages: [1]
« previous next »