« previous next »
Pages: [1]

Author Topic: Want to try my first R/D bow  (Read 1574 times)

0 Members and 1 Guest are viewing this topic.

Offline ccase39

  • Member
  • Posts: 177
  • Loving to learn
Want to try my first R/D bow
« on: October 12, 2015, 09:31:06 pm »
This one will be out of a board of Osage. Next bow I make will come from a stave but already have the lumber for this and limited funds right now (somehow all my fun money is magically turning into pieces of wood). I want to try a R/D bow this time. What length should I go for? I would like to be between 50# and 60# at 27 inches. I read that you tiller a R/d bow a little different than flatbows is that correct? I am planning on using an Osage board backed with bamboo. Who has some good build alongs that I might reference?
Next up I will be looking for a good source for a sight unseen Osage stave which I know is risky but we will cross that path when I get there. Thanks!
Logged
Reading
The Traditional Boyers Bible Vol 1
The Bent Stick

Working on bow #7

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,529
Re: Want to try my first R/D bow
« Reply #1 on: October 12, 2015, 10:29:59 pm »
62" to 64" long, 1 3/8" to 1 1/2"wide to mid limb and a straight taper to 3/8" tips. This is with a 4" handle with 1 1/2" to 2" long fades. Add 3" to 4" of Perry reflex at glue up.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,889
  • Eddie Parker
Re: Want to try my first R/D bow
« Reply #2 on: October 12, 2015, 10:31:50 pm »
I don't think a Perry reflex is a true R/D glue up.
Logged
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,529
Re: Want to try my first R/D bow
« Reply #3 on: October 12, 2015, 10:33:49 pm »
I misread his post.  :-[
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline GB

  • Member
  • Posts: 519
Re: Want to try my first R/D bow
« Reply #4 on: October 13, 2015, 01:58:08 am »
Found this one in the Build-Along section:

http://www.primitivearcher.com/smf/index.php/topic,6916.0.html
Logged
Yeah, I remember when we had a President who didn't wear a tinfoil hat.

Offline ccase39

  • Member
  • Posts: 177
  • Loving to learn
Re: Want to try my first R/D bow
« Reply #5 on: October 13, 2015, 02:06:37 am »
Quote from: GB on October 13, 2015, 01:58:08 am
Found this one in the Build-Along section:

http://www.primitivearcher.com/smf/index.php/topic,6916.0.html
That looks great! I'll give it a go when my bamboo gets here!
Logged
Reading
The Traditional Boyers Bible Vol 1
The Bent Stick

Working on bow #7

Offline GB

  • Member
  • Posts: 519
Re: Want to try my first R/D bow
« Reply #6 on: October 13, 2015, 02:24:23 am »
Good luck to you.  Roy over on TradGang makes nice ones, too. 

http://tradgang.com/noncgi/ultimatebb.php?ubb=get_topic;f=125;t=012579;p=1
Logged
Yeah, I remember when we had a President who didn't wear a tinfoil hat.

Offline ccase39

  • Member
  • Posts: 177
  • Loving to learn
Re: Want to try my first R/D bow
« Reply #7 on: October 14, 2015, 11:52:49 am »
Anyone know of a good build along that's NOT a tri lam.
Logged
Reading
The Traditional Boyers Bible Vol 1
The Bent Stick

Working on bow #7
Pages: [1]
« previous next »