Author Topic: Holey Ossie  (Read 8149 times)

0 Members and 1 Guest are viewing this topic.

Offline Aaron H

  • Member
  • Posts: 3,437
Re: Holey Ossie
« Reply #15 on: December 10, 2015, 10:40:01 am »
Great bow,  I like it

Offline Hans H

  • Member
  • Posts: 420
Re: Holey Ossie
« Reply #16 on: December 10, 2015, 11:59:06 am »
very nice bow, congrats.
Hans
Hans,      Bavaria, Germany

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Holey Ossie
« Reply #17 on: December 10, 2015, 12:04:52 pm »
Real nice bow.
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline Drewster

  • Member
  • Posts: 687
Re: Holey Ossie
« Reply #18 on: December 10, 2015, 01:05:53 pm »
WOW, thanks everyone for the great response.  I wasn't expecting so many nice comments.

Pat B, yes, perhaps I'm a little overly cautious working close to the fades.  I'll have to be conscious of that with the next bow....thanks.  Yep, making some progress but SO much still to learn :-)

rps3, good point.  Those rings were so tight that I never considered that they may turn loose.  I'll certainly keep an eye it.  That area around the knot is a bit concave, so I decided not to remove too much of it.  Thanks for the "heads up".
Drew - Boone, NC

Offline Josh B

  • Member
  • Posts: 3,741
Re: Holey Ossie
« Reply #19 on: December 12, 2015, 12:15:37 am »
That's a beauty for sure!  Nicely done Sir!  Josh

Offline Selfbowman

  • Member
  • Posts: 2,916
Re: Holey Ossie
« Reply #20 on: December 12, 2015, 02:02:26 am »
Well done Drew . I like it. My length also. Arvin
Well I'll say!!  Osage is king!!

Offline RyanR

  • Member
  • Posts: 833
Re: Holey Ossie
« Reply #21 on: December 12, 2015, 12:23:55 pm »
That's a sharp lookin bow. I like everything about it.

Offline JonW

  • Member
  • Posts: 1,906
Re: Holey Ossie
« Reply #22 on: December 13, 2015, 10:06:59 am »
Totally missed this one. That is a very nice bow sir. Great work.

Offline Danzn Bar

  • Member
  • Posts: 4,166
Re: Holey Ossie
« Reply #23 on: December 13, 2015, 03:40:42 pm »
Very nice looking stick you've got there.....
DBar
Integrity is doing the right thing when no one is looking

Offline JW_Halverson

  • Member
  • Posts: 11,850
Re: Holey Ossie
« Reply #24 on: December 13, 2015, 04:17:31 pm »
Looks like you wrung every bit of good outa that bit of stave! Glad you opted to leave the grip nekkid!
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.

Offline dantolin

  • Member
  • Posts: 175
Re: Holey Ossie
« Reply #25 on: December 14, 2015, 03:19:04 pm »
That's a true beauty, man!! Love the curves you put on her :)
And nice finish as well.
Could you show the form from which you did the recurves, or give us measurements?
Congratulations for that bow!!!

Offline Drewster

  • Member
  • Posts: 687
Re: Holey Ossie
« Reply #26 on: December 14, 2015, 03:41:10 pm »
Dan, here's the form I used.  It's laminate plywood about 2" thick.  The radius turned out to be 7 7/16".  Dry heat worked very well on this seasoned stave.  I also used a .050 steel plate clamped to the belly to help retard any splinters from raising.  Hope this helps.   Drew


Drew - Boone, NC

Offline Stick Bender

  • Member
  • Posts: 2,003
Re: Holey Ossie
« Reply #27 on: December 14, 2015, 05:43:01 pm »
Nice bow love the handle,nice pics !!
If you fear failure you will never Try !

Offline RLimerick

  • Member
  • Posts: 51
Re: Holey Ossie
« Reply #28 on: April 20, 2016, 08:31:11 am »
Great looking bow.  I like that wooden cone arrow rest.  I'll have to try that on my next bow.  Great colors!

Offline ---GUTSHOT--->

  • Member
  • Posts: 1,310
Re: Holey Ossie
« Reply #29 on: April 20, 2016, 04:17:38 pm »
Drew now that's a show stopper. I like the whole thing looks great.