« previous next »
Pages: [1]

Author Topic: Osage character bow help  (Read 2367 times)

0 Members and 1 Guest are viewing this topic.

Offline JonW

  • Member
  • Posts: 1,906
Osage character bow help
« on: November 17, 2016, 02:47:24 pm »
Look this over and tell me what you think. Pulled to 16".
Logged

Stringman

  • Guest
Re: Osage character bow help
« Reply #1 on: November 17, 2016, 03:16:23 pm »
Left limb is stiff, right mid limb could use a few scrapes.
Logged

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Osage character bow help
« Reply #2 on: November 17, 2016, 03:20:33 pm »
I like the left, for now. And agree with scooter on the right. Looks the kink is allowing most of the movement.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline JonW

  • Member
  • Posts: 1,906
Re: Osage character bow help
« Reply #3 on: November 17, 2016, 03:32:14 pm »
Left limb is good. With a straight edge the kink on the right limb isn't really working much. What is messing with me is the dipped area between the knots on the right mid limb. It's working some but looks stiff to me.
Logged

Stringman

  • Guest
Re: Osage character bow help
« Reply #4 on: November 17, 2016, 03:45:40 pm »
I'm assuming you still need to take weight off, so those are the areas I would scrape. You're right it ain't far off.
Logged

Offline TimBo

  • Member
  • Posts: 1,030
Re: Osage character bow help
« Reply #5 on: November 17, 2016, 03:55:39 pm »
Anyone else think the inner section on the right needs to work more (between the handle and the kink)?  It doesn't look like you are getting much movement there compared to the same area on the left. 
Logged

Offline gfugal

  • Member
  • Posts: 746
Re: Osage character bow help
« Reply #6 on: November 17, 2016, 04:24:22 pm »
Looking good. I like its character  :). The kink is scarry and is definetly going to take skill to tiller. right after the knott definetly looks like its doing more work than right before it, however I would be carful taking anything off around there since 1) that area is doing a lot more work than the same area on the other side, and 2) if that is a knott it will be much more likely to break there understress.  I think in generall the last qaurter of both limbs at the tips are awfully thick, but you're probably planning on thining that when you start drawing it further. I would start at the tips and left side and just watch that area some more. 
Logged
Greg,
No risk, no gain. Expand the mold and try new things.

Offline JonW

  • Member
  • Posts: 1,906
Re: Osage character bow help
« Reply #7 on: November 17, 2016, 05:03:51 pm »
20" draw. Need to lose 10 lbs.
Logged

Offline bubby

  • Member
  • Posts: 11,054
Re: Osage character bow help
« Reply #8 on: November 17, 2016, 05:47:49 pm »
that looks better to me Jon, we have the same tiller set up it looks like but i just put a screwdriver in the holes
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline Del the cat

  • Member
  • Posts: 8,291
    • Derek Hutchison Native Wood Self Bows
Re: Osage character bow help
« Reply #9 on: November 17, 2016, 05:53:46 pm »
I'd say take some off the outer 1/3 of each...
Del
Logged
Health warning, these posts may contain traces of nut.

Offline JonW

  • Member
  • Posts: 1,906
Re: Osage character bow help
« Reply #10 on: November 17, 2016, 05:56:48 pm »
Thanks Bub.

Del that is what I was thinking to get the last six inches of draw. Thanks.
Logged

Offline DuBois

  • Member
  • Posts: 2,020
Re: Osage character bow help
« Reply #11 on: November 17, 2016, 07:13:30 pm »
Quote from: Del the cat on November 17, 2016, 05:53:46 pm
I'd say take some off the outer 1/3 of each...
Del

That's what I'm seeing too.
Logged
Pages: [1]
« previous next »