Author Topic: yew wood dry heat?  (Read 2575 times)

0 Members and 1 Guest are viewing this topic.

Offline HighEagle

  • Member
  • Posts: 227
yew wood dry heat?
« on: February 13, 2016, 12:19:29 pm »
Can I use dry heat to slightly flip the tips or should I boil them? On yew 64" ttt,  1/2"w x 5/8" t  tapering back 12" to 1 1/2"w x 3/4"t  the bow is now pulling at this time 45.5# @ 22" Thanks Chuck
« Last Edit: February 13, 2016, 11:08:41 pm by HighEagle »
Armstrong, BC

Offline wizardgoat

  • Member
  • Posts: 2,397
Re: yew wood dry heat?
« Reply #1 on: February 13, 2016, 01:25:58 pm »
If they're thin enough dey heat will be fine, but I usually use steam or boil

Offline Aaron H

  • Member
  • Posts: 3,437
Re: yew wood dry heat?
« Reply #2 on: February 13, 2016, 01:52:02 pm »
Do you also set yours with dry heat after your steam or boil Ryan?

Offline wizardgoat

  • Member
  • Posts: 2,397
Re: yew wood dry heat?
« Reply #3 on: February 13, 2016, 02:09:18 pm »
if I'm tweaking parts on working areas (deflex reflex kinks or string alignment) I'll use steam then a little bit of dry heat. I usually don't bend recurves till late, the tips are thin enough that they bend like spaghetti and have very little spring back

Offline Del the cat

  • Member
  • Posts: 8,322
    • Derek Hutchison Native Wood Self Bows
Re: yew wood dry heat?
« Reply #4 on: February 13, 2016, 04:11:32 pm »
Either or both, sometimes if you are getting spring back or band pulling out, then combining heat treating and heat bending together will help fix the bend in place.
I use steam for thick sections.
Del
Health warning, these posts may contain traces of nut.

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: yew wood dry heat?
« Reply #5 on: February 14, 2016, 08:24:17 am »
Maybe its just me? But I've found yew to need a bit more heat time to reduce spring back. It likes going back to where it came from and that's good trait in bow wood. Either steaming or dry heat.
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline HighEagle

  • Member
  • Posts: 227
Re: yew wood dry heat?
« Reply #6 on: February 14, 2016, 12:14:49 pm »
Thanks Guys, I think ill use the combination of the steam and dry heat.. Thanks again Chuck
Armstrong, BC

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,609
Re: yew wood dry heat?
« Reply #7 on: February 14, 2016, 12:24:08 pm »
I've used dry heat(with oil) for minnow adjustments with yew.  If you are going to use both steam and dry heat seal the back well with shellac. Shellac can handle the stream and will help prevent checking on the back.
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline HighEagle

  • Member
  • Posts: 227
Re: yew wood dry heat?
« Reply #8 on: February 14, 2016, 10:34:46 pm »
Man 20min of steam and my first tip bent like a dream, My cull was a little more radical then I thought, May be close to a static tip will see how it all pans out. Thanks for the help Chuck 
Armstrong, BC