Author Topic: Steam bending- before/during/after tillering?  (Read 2094 times)

0 Members and 1 Guest are viewing this topic.

Offline arachnid

  • Member
  • Posts: 517
Steam bending- before/during/after tillering?
« on: April 28, 2016, 06:33:03 am »
So I have a few pieces if white oak left and I want to make a 3pc takedown bow with oak self-limbs.
Question is (like the title...)- when is the best time to steam in the reflex?

Thanks
Dor

Offline tattoo dave

  • Member
  • Posts: 1,540
  • Rockford, MI
Re: Steam bending- before/during/after tillering?
« Reply #1 on: April 28, 2016, 04:07:21 pm »
Hey Dor, I've steamed at all points mentioned. Seems to me steaming before tillering is best, but whatever works for you. I've never had much luck with steaming oak though. There's probably a better option wood for a take down too. But then again I've never made a takedown. Good luck, keep us posted.

Tattoo Dave
Rockford, MI

Offline PatM

  • Member
  • Posts: 6,737
Re: Steam bending- before/during/after tillering?
« Reply #2 on: April 28, 2016, 05:37:47 pm »
Not sure how much reflex you'll hold with steam. Dry heat is the preferred method.

Offline simson

  • Member
  • Posts: 2,310
  • stonehill-primitive-bows
    • stonehill-primitive-bows
Re: Steam bending- before/during/after tillering?
« Reply #3 on: April 29, 2016, 03:45:00 am »
I do it before tillering at near dimensions
Simon
Bavaria, Germany

Offline joachimM

  • Member
  • Posts: 675
  • Good - better - broken
Re: Steam bending- before/during/after tillering?
« Reply #4 on: April 29, 2016, 03:59:23 am »
I do it before tillering at near dimensions

Agreed. But with oak I prefer to steam the bend and later on toast the belly in a caul without further bending.

Offline arachnid

  • Member
  • Posts: 517
Re: Steam bending- before/during/after tillering?
« Reply #5 on: April 30, 2016, 01:45:18 pm »
Thanks guys.
And while we're at it- in modern 3pc takedowns, the limbs are attached at an angle, giving the bow some deflex. Is there a benefit to do it like that (smoother draw maybe?)  and is it that critical? What will happen if iI attach the limbs a a zero angle?