Author Topic: Trophy Bighorn sheep bow, 26" draw  (Read 18774 times)

0 Members and 1 Guest are viewing this topic.

Offline crooketarrow

  • Member
  • Posts: 2,790
Re: Trophy Bighorn sheep bow, 26" draw
« Reply #30 on: May 27, 2016, 07:30:13 am »
 SWEETTTTTTTTTTTTTTTTTTTTT
DEAD IS DEAD NO MATTER HOW FAST YOUR ARROW GETS THERE
20 YEARS OF DOING 20 YEARS OF LEARNING 20 YEARS OF TEACHING

Offline BowEd

  • Member
  • Posts: 9,390
  • BowEd
Re: Trophy Bighorn sheep bow, 26" draw
« Reply #31 on: June 05, 2016, 09:07:44 am »
That looks fantastic chuck, love it
Figured it up here in grains for sinew you used.Close to 1800.Is that including the wrappings on the handle too?That must end up to thickness wise being a good 1/4" thick for sure then dried.How wide did your bow end up too?
I used 1000 grains on my latest composite over a 48" length and it ended up a strong 5/32" thick on 1and1/4" wide@ fades limbs.I too use elk leg sinew mostly using my longest ones for the last course.Around 20" long I guess.
BowEd
You got to stand for something or you'll fall for anything.
Ed

Offline BowEd

  • Member
  • Posts: 9,390
  • BowEd
Re: Trophy Bighorn sheep bow, 26" draw
« Reply #32 on: June 05, 2016, 09:10:37 am »
I wrote it down somewhere but can't find it. If I remember correctly 112 grams of shredded elk leg sinew weighed to have the exact same amount on each limb. Used the longest leg tendons I had(up to 22" long) to have unbroken layers on the top and bottom layer. Shorter bundles in between.
Sorry quoted the wrong statement.There that's better.
BowEd
You got to stand for something or you'll fall for anything.
Ed