« previous next »
Pages: 1 ... 25 26 [27] 28

Author Topic: My board bow (build along?)  (Read 83975 times)

0 Members and 1 Guest are viewing this topic.

Offline Marin

  • Member
  • Posts: 461
Re: My board bow (build along?)
« Reply #390 on: April 23, 2017, 01:02:19 pm »
Thanks Beadman,
Where are there any bow making gathering btw?
Logged

Offline Marin

  • Member
  • Posts: 461
Re: My board bow (build along?)
« Reply #391 on: April 23, 2017, 11:59:11 pm »
Well, I sanded the tips and quickly sanded the entire thing with 220 sandpaper. It's as smooth as a river rock. I decided to do the tips like bubby's  board Bow because I thought it looked practical and just cool.
I haven't sealed anything in a while so let's see how this turns out.
Do you guys lay your bows down when you seal them or do you hang them up somehow?
Also was it fine that I sanded the back a little?
Finally, the leather I have for the handle (thanks bubby) is just slightly small in length so that it cannot fully wrap around the handle. Is there a way I can somehow still sew or lash the leather together to make the handle?
Logged

Offline bubby

  • Member
  • Posts: 11,054
Re: My board bow (build along?)
« Reply #392 on: April 24, 2017, 12:25:49 am »
How big waa the leather, it is usually stretchy one way or the other, find out wich way it stretches and see if it will fit
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline BowEd

  • Member
  • Posts: 9,390
  • BowEd
Re: My board bow (build along?)
« Reply #393 on: April 24, 2017, 08:53:04 am »
It shows that on the thread Primitive Shots and Events.One may be in your area possibly,or maybe another bowyer who's made a number of bows is in your area too.
Logged
BowEd
You got to stand for something or you'll fall for anything.
Ed

Offline Marin

  • Member
  • Posts: 461
Re: My board bow (build along?)
« Reply #394 on: April 24, 2017, 11:09:20 pm »
About finishing, this is what I plan on doing
Sand the bow once more with 220 grit, wipe it with a wet cloth, apply several coats of tung oil.
How many coats should I apply? And do I need to hang up the bow while I finish it or can it lie down (which will prevent the handle area from getting tung oil).
Logged

Offline bubby

  • Member
  • Posts: 11,054
Re: My board bow (build along?)
« Reply #395 on: April 25, 2017, 12:11:51 am »
Just wip it with a tack cloth, if you wet it you will have to sand it again as it will raise the grain. Use at least 4 coats of tung oil very thin coats, i lean it up agains the house so just the very tips touch anything
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline Knoll

  • Member
  • Posts: 3,016
  • Mikey
Re: My board bow (build along?)
« Reply #396 on: April 25, 2017, 10:03:11 am »
Quote from: bubby on April 25, 2017, 12:11:51 am
i lean it up agains the house so just the very tips touch anything

So THAT's why you have all those dots across backside of your place!
Logged
... alone in distant woods or fields, in unpretending sproutlands or pastures tracked by rabbits, even in a bleak and, to most, cheerless day .... .  I suppose that this value, in my case, is equivalent to what others get by churchgoing & prayer.  Hank Thoreau, 1857

Offline turtle

  • Member
  • Posts: 1,069
  • PA1007207
Re: My board bow (build along?)
« Reply #397 on: April 26, 2017, 02:36:33 am »
I usually tie a string around one tip to hang it from. Switch tips between coats.
Logged
Steve Bennett

Offline Marin

  • Member
  • Posts: 461
Re: My board bow (build along?)
« Reply #398 on: May 01, 2017, 11:08:48 pm »
I'm in the process of sealing the bow with spray poly. Unfortunately, after spraying on the first layer the lid broke off the can  >:( so now I have to run to the store for another can.
Logged

Offline Marin

  • Member
  • Posts: 461
Re: My board bow (build along?)
« Reply #399 on: May 02, 2017, 12:45:57 am »
I'm trying to think of alternatives to spray poly. Do you guys think that simple wood varnish (the kind they sell at craft stores) would work?
Logged

Offline Marin

  • Member
  • Posts: 461
Re: My board bow (build along?)
« Reply #400 on: May 02, 2017, 01:47:51 am »
Btw, Bubby could you clear out some of your inbox. I can't send you the message in trying to send you.
Logged

Offline jeffp51

  • Member
  • Posts: 1,640
Re: My board bow (build along?)
« Reply #401 on: May 02, 2017, 10:30:21 am »
Tung oil is my favorite
Logged

Offline bubby

  • Member
  • Posts: 11,054
Re: My board bow (build along?)
« Reply #402 on: May 02, 2017, 12:19:56 pm »
Cleaned it out
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline Marin

  • Member
  • Posts: 461
Re: My board bow (build along?)
« Reply #403 on: May 02, 2017, 05:24:05 pm »
I guess I could use ting oil but, just out of curiosity, why doesn't craft store wood varnish work?
Logged

Offline Marin

  • Member
  • Posts: 461
Re: My board bow (build along?)
« Reply #404 on: May 05, 2017, 12:20:52 am »
I fished varnishing the bow. I was able to squirt some poly out of the bottle and then paint it on. I'm going to post a picture once I put leather on the handle, so you can see it in all it's glory.
Btw Bubby, do you usually sew handles on or do you glue the leather together?
Logged
Pages: 1 ... 25 26 [27] 28
« previous next »