« previous next »
Pages: [1] 2 3 4

Author Topic: Birch bark backing  (Read 13102 times)

0 Members and 1 Guest are viewing this topic.

Offline sleek

  • Member
  • Posts: 6,680
Birch bark backing
« on: October 22, 2016, 05:08:14 pm »
So i got some bark and it is pretty thick. Does it need to be thinned down? How thick is it when applied typically?
Logged
Tread softly and carry a bent stick.

Dont seek your happiness through the approval of others

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,884
  • Eddie Parker
Re: Birch bark backing
« Reply #1 on: October 22, 2016, 06:37:45 pm »
Paper thin, at least it is on my Horn Bow.
Logged
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,483
Re: Birch bark backing
« Reply #2 on: October 22, 2016, 07:15:08 pm »
You should be able to peel thin layers off of what you have. Is it paper(canoe) birch?
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Orrum

  • Member
  • Posts: 232
Re: Birch bark backing
« Reply #3 on: October 22, 2016, 08:37:09 pm »
I got plenty of river Burch in the yard and they r peeling like crazy since hurricane Mathew!  Can you piece it or does it have to be one continous sheet? I have decided to make a red oak board bow and this would look better than fiberglass drywall tape me thinks!!!
Logged
Knapping....If your hobby does not consume you then you have no hobby.

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,884
  • Eddie Parker
Re: Birch bark backing
« Reply #4 on: October 22, 2016, 09:53:41 pm »
My bow has thin 1/2" strips layered continously down the limb.
Logged
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,483
Re: Birch bark backing
« Reply #5 on: October 22, 2016, 09:54:35 pm »
Paper birch is the only birch bark I've heard of using as backing and it can be use decoratively or as a moisture barrier. I don't thing river birch bark would be more than decorative.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline sleek

  • Member
  • Posts: 6,680
Re: Birch bark backing
« Reply #6 on: October 22, 2016, 10:09:22 pm »
Tight bond III should make it a moisture barrier, right?
Logged
Tread softly and carry a bent stick.

Dont seek your happiness through the approval of others

Offline Orrum

  • Member
  • Posts: 232
Re: Birch bark backing
« Reply #7 on: October 23, 2016, 10:20:49 am »
I can work with this!  So let's say I back my red oak board bow with the fiberglass tape. After its cleaned up can I put birch bark on top for looks. This is sounding better looking.
Logged
Knapping....If your hobby does not consume you then you have no hobby.

Offline Orrum

  • Member
  • Posts: 232
Re: Birch bark backing
« Reply #8 on: October 23, 2016, 10:21:55 am »
Could somebody put a pic of s birch bark bow?
Logged
Knapping....If your hobby does not consume you then you have no hobby.

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,483
Re: Birch bark backing
« Reply #9 on: October 23, 2016, 11:22:17 am »
Why  are you using FG tape  as a backing? There are lots of backing materials better than FG tape. IMO.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline PatM

  • Member
  • Posts: 6,737
Re: Birch bark backing
« Reply #10 on: October 23, 2016, 11:25:58 am »
Quote from: Orrum on October 23, 2016, 10:21:55 am
Could somebody put a pic of s birch bark bow?
Logged

Offline Orrum

  • Member
  • Posts: 232
Re: Birch bark backing
« Reply #11 on: October 23, 2016, 11:34:03 am »
Wow that's great Patm!!!    Do you glue the paper thin bark and coat it with Tightbond II and sand it again?  It's a beautiful bow for sure!!!
Logged
Knapping....If your hobby does not consume you then you have no hobby.

Offline BowEd

  • Member
  • Posts: 9,390
  • BowEd
Re: Birch bark backing
« Reply #12 on: October 23, 2016, 11:34:59 am »
sleek...It comes off in layers like Pat said.I had to get mine from a canoe maker in Oregon since there's not much birch growing here.Thickness wise I get it around typing paper thin ten/one thousands thick and 1.5" wide or as wide as the bow.A little thicker does'n hurt I guess but below 1/32" thick anyway.I'd soak it in water then to make it a little more pliable for the characterish places on a bow.Usually around 2' long for my use.You can get it longer if you want.TB 3 works good for applying it on.Sizng both surfaces.Put it on just like a snake skin.I've seen people wrap it on too in thinner strips, but I don't prefer to do it that way.Each to his own.It does seem to be a very good vapor barrier.I use it on sinew backed bows.Just as good as snake skin.
Orrum...Here's a pic
Logged
BowEd
You got to stand for something or you'll fall for anything.
Ed

Offline Orrum

  • Member
  • Posts: 232
Re: Birch bark backing
« Reply #13 on: October 23, 2016, 11:37:41 am »
Patb that's what is on a how to site I found. What else can be used. I don't like the idea of silk or linen or paper and have no sinew. I am toying with maybe a one eight strip of wood but that sounds hard for a newbie. I figured fiberglass would help me with strength the easiest. I am going to put a cedar handle on it.
Logged
Knapping....If your hobby does not consume you then you have no hobby.

Offline PatM

  • Member
  • Posts: 6,737
Re: Birch bark backing
« Reply #14 on: October 23, 2016, 12:08:16 pm »
Quote from: Orrum on October 23, 2016, 11:34:03 am
Wow that's great Patm!!!    Do you glue the paper thin bark and coat it with Tightbond II and sand it again?  It's a beautiful bow for sure!!!
   
   It's just glued on over the sinew and coated with tru-oil and wax. No point in sanding it.

  BTW why are you against silk/linen and OK with glass tape, especially on a primitive site? Won't get any support for that.
Logged
Pages: [1] 2 3 4
« previous next »