« previous next »
Pages: 1 2 3 [4]

Author Topic: There's a hole in my belly!  (Read 9665 times)

0 Members and 1 Guest are viewing this topic.

Offline randman

  • Member
  • Posts: 647
Re: There's a hole in my belly!
« Reply #45 on: December 13, 2016, 02:52:43 am »
In my opinion, it all depends on how thick that first growth ring is. If it is 1/4" thick and all you've done is skinned a few little ridges off, you're fine, hasn't been violated at all unless you've nicked from one ring to the next. If the growth ring is less that 1/32" then it might be a little risky.
Logged
Beauty is in the eye of the beer holder.

Offline Marc St Louis

  • Administrator
  • Member
  • Posts: 7,869
  • Keep it flexible
    • Marc's Bows and Arrows
Re: There's a hole in my belly!
« Reply #46 on: December 13, 2016, 07:09:48 pm »
You'll never see a 1/4" thick ring on HHB

Use a shallow D section belly as well, that will take some stress off the back
Logged
Home of heat-treating, Corbeil, On.  Canada

Marc@Ironwoodbowyer.com

Offline upstatenybowyer

  • Member
  • Posts: 2,700
Re: There's a hole in my belly!
« Reply #47 on: December 13, 2016, 07:24:33 pm »
I gave it a shallow D section belly as you suggested on another thread Marc as well as a nice even heat treating. I'll have to tweak the tiller a bit more, but I think this one's gonna make it. I'll be sure to post the finished bow when it's ready.
Logged
"Even as the archer loves the arrow that flies, so too he loves the bow that remains constant in his hands."

Nigerian Proverb
Pages: 1 2 3 [4]
« previous next »