Author Topic: My first Atlatl and Dart  (Read 11113 times)

0 Members and 1 Guest are viewing this topic.

Offline Hawkdancer

  • Member
  • Posts: 5,027
Re: My first Atlatl and Dart
« Reply #30 on: May 11, 2017, 11:06:36 pm »
Wagh!!  I'm full of questions tonight😂  BJ, how long did you make the fore shaft, and how is it secured to the main?  How is the point secured?  Sinew and pitch?  What are the specs on the point?
I like that, hopefully you can name it "Deerslayer" (AT)!
Hawkdancer
Life is far too serious to be taken that way!
Jerry

Offline bjrogg

  • Member
  • Posts: 10,701
  • Cedar Pond
Re: My first Atlatl and Dart
« Reply #31 on: May 12, 2017, 06:23:46 am »
Hawkdancer I'm not by dart right now but I think fore shaft was about 9" long. First I sinew wrap end of main shaft and let dry. Then I drilled a smaller diameter hole in main shaft. If I remember right I then use the tang for handle on my rasp to ream a tappered hole in mainshaft. Then I used file to tapper fore shaft. I halvted point with pine pitch glue and wrapped with sinew. The point is from a old circular saw blade. I cut it out with a cut off wheel in my angle grinder then sharpened with grinder and file. It's not super hard steel a file will slowly cut it. I think it's probably about 6" x 1 /3/4" I never really measured it just made what I thought looked right.
Bjrogg
A hot cup of coffee and a beautiful sunrise

Offline High-Desert

  • Member
  • Posts: 874
Re: My first Atlatl and Dart
« Reply #32 on: May 12, 2017, 10:06:20 am »
That dart is is quite a projectile. Nice lookin art work. The point looks pretty darn vicisious. It's great to see these atlatl and darts in here. They inspired me to finally attempt some darts and give a go st throwing.

Eric
Eric

Offline bjrogg

  • Member
  • Posts: 10,701
  • Cedar Pond
Re: My first Atlatl and Dart
« Reply #33 on: May 12, 2017, 10:45:04 am »
Thanks high desert 🌵 I'm kinda surprised there aren't more Atlatl post on here. We have a black powder section but no Atlatl. I'm really kinda doubting I'll ever hunt with mine but I still am very interested in them. This is probably as close as I'll get to Hunting with one (AT)  🐘
Bjrogg
A hot cup of coffee and a beautiful sunrise

Offline Hawkdancer

  • Member
  • Posts: 5,027
Re: My first Atlatl and Dart
« Reply #34 on: May 13, 2017, 12:35:00 am »
Thanks, BJ,
I will have to try that method.  I will try to post a pic of my dart rest this weekend.
Hawkdancer
Life is far too serious to be taken that way!
Jerry

Offline bjrogg

  • Member
  • Posts: 10,701
  • Cedar Pond
Re: My first Atlatl and Dart
« Reply #35 on: May 13, 2017, 06:24:25 am »
Thanks Hawkdancer I was going to ask about so pictures. Like to see some more atlatls and darts. Pictures are always good.
Bjrogg
A hot cup of coffee and a beautiful sunrise

Offline JEB

  • Member
  • Posts: 1,735
Re: My first Atlatl and Dart
« Reply #36 on: May 13, 2017, 08:07:28 am »
Looking good BJ. I have made a bunch of throwers and darts for the grandkids to toss around.  They have a ball doing it. Check out Flint knapping tools, Mark Bracken. He is a 4 time world champion.  You get down to Flintridge, Mark is there and tosses a few darts around plus they have targets there for instruction.

Offline GlisGlis

  • Member
  • Posts: 1,477
Re: My first Atlatl and Dart
« Reply #37 on: May 15, 2017, 10:07:11 am »
just saw in TV a movie called "the tracker"
Pretty nice australian story with some atlatl action
we should have a sticky thread dedicated to movies, series and books  related to primitive world and stories

Offline Hawkdancer

  • Member
  • Posts: 5,027
Re: My first Atlatl and Dart
« Reply #38 on: May 16, 2017, 10:54:30 pm »
Got the pics as far as Imgur public, but can't get them to move to here😰   Brain gas and dumb attacks, even with the directions looking at me on the old iPad!  The post title there is "dart rest and dart".   Got a reply on that site!
Hawkdancer
Life is far too serious to be taken that way!
Jerry

Offline Hawkdancer

  • Member
  • Posts: 5,027
Re: My first Atlatl and Dart
« Reply #39 on: May 17, 2017, 11:19:58 am »
BJ,
Sent you a pm re: pics
Hawkdancer
Life is far too serious to be taken that way!
Jerry

Offline Buckeye Guy

  • Member
  • Posts: 3,033
Re: My first Atlatl and Dart
« Reply #40 on: May 19, 2017, 08:38:36 pm »
Nice job
Guy Dasher
The Marshall Primitive Archery Rendezvous
Primitive Archery Society
Having  fun
To God be the glory !

Offline Trapper Rob

  • Member
  • Posts: 3,718
Re: My first Atlatl and Dart
« Reply #41 on: June 04, 2017, 12:49:16 pm »
BJ I wouldn't want to be on the receiving end of it.
Nice job on it.

Offline bjrogg

  • Member
  • Posts: 10,701
  • Cedar Pond
Re: My first Atlatl and Dart
« Reply #42 on: June 04, 2017, 06:57:04 pm »
Those are nice pictures Hawkdancer
Thanks Guy
Rob I think it's out of range now. I put a nice obsidian point on it and traded DVS hunter a nearly finished yew bow. It has a new home down south now and I'm very happy DVS liked it so much.
Bjrogg
A hot cup of coffee and a beautiful sunrise