Author Topic: Not sure where to introduce myself to the forum...  (Read 3103 times)

0 Members and 1 Guest are viewing this topic.

Offline oldsilver

  • Member
  • Posts: 8
  • 856-261-5228
Not sure where to introduce myself to the forum...
« on: June 30, 2017, 08:46:12 am »
But my name is Jim. I live in s.jersey. I have worked as an avocational archaeologist doing units (5x5s)  with state guys and contract archaeologists. I am pushing 60, and have had spine surgery in 2011 that left me using 2 canes. So...I was always interested in making my own lithic tools, so I started watching u tube, all the vids I could. bought some copper tools. then made my own from my whitetail antlers and bones. So far I've lost my thumbnail, have a large lump on the base of my thumb from missing the stones, been yelled at by my wife for pieces for glass,chert,jasper in her feet. I ordered some rock of the net. some are easy, the most damage/stacking/stepping  and waste is with that darn keokuk :-\. I cant seem to use an Ishi stick properly, i have better luck with the bone and antler for some reason. Hammerstones are awesome. After making a couple of points from different rock, I am sooo addicted to knapping. My uncle was a professor of geology in Tenn. ,and he always gave me his old rock collections. So I'm a rock hound, I shoot a longbow made by a fellow who used to work for Howard Hill years ago. Been hunting and fishing since I was 6. I also trap critters in the winter if I can get a good snare line out. Well. that's enough, here are a few pics of what i made so far... thanks for reading.
Kindness is the language the blind can see and the deaf can hear.

Stringman

  • Guest
Re: Not sure where to introduce myself to the forum...
« Reply #1 on: June 30, 2017, 08:55:13 am »
Can't see the pics, but welcome to the crowd! The addiction is real and it only gets worse, but the effects can be lessened by having plenty of rocks around.  :KN

Offline oldsilver

  • Member
  • Posts: 8
  • 856-261-5228
Re: Not sure where to introduce myself to the forum...
« Reply #2 on: June 30, 2017, 09:18:17 am »
it wouldnt upload any... file too big. Ill try to shrink 'em down.
Kindness is the language the blind can see and the deaf can hear.

Offline oldsilver

  • Member
  • Posts: 8
  • 856-261-5228
Re: Not sure where to introduce myself to the forum...
« Reply #3 on: June 30, 2017, 09:26:10 am »
2 more...
Kindness is the language the blind can see and the deaf can hear.

Offline Outbackbob48

  • Member
  • Posts: 2,752
Re: Not sure where to introduce myself to the forum...
« Reply #4 on: June 30, 2017, 09:32:24 am »
Oldsilver, try 640x480,

Offline Tower

  • Member
  • Posts: 2,296
Re: Not sure where to introduce myself to the forum...
« Reply #5 on: June 30, 2017, 10:03:01 am »
 Welcome to the addiction!!!
He who sacrifices freedom for a security deserves neither one.  Benjamin Franklin!

Offline bjrogg

  • Member
  • Posts: 10,797
  • Cedar Pond
Re: Not sure where to introduce myself to the forum...
« Reply #6 on: June 30, 2017, 10:24:44 am »
Welcome  oldsilver, your going to fit right in here.
Bjrogg
A hot cup of coffee and a beautiful sunrise

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,884
  • Eddie Parker
Re: Not sure where to introduce myself to the forum...
« Reply #7 on: June 30, 2017, 10:54:44 am »
Welcome, Sir. Looks like you are off to a good start.
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline nclonghunter

  • Member
  • Posts: 1,779
Re: Not sure where to introduce myself to the forum...
« Reply #8 on: June 30, 2017, 12:24:35 pm »
Welcome, sounds like you are traveling a road that most do when learning. It takes time and lots of patience. If you can find a local and experienced knapper it will aid greatly in the learning process. Keokuk is considered a great rock for beginning. If you are getting steps and fractures I would bet that your edge is not being set up correctly. Grinding those edges and making them strong for flake removal is important. Once you have been shown how it is done you will make great improvements....Have fun with the journey and never forget it is just a rock!
There are no bad knappers, only bad flakes

Offline Sparrow

  • Member
  • Posts: 1,985
  • Who shot cock robin ? I said the sparrow.
    • Dream Fish Charters
Re: Not sure where to introduce myself to the forum...
« Reply #9 on: June 30, 2017, 01:48:37 pm »
Welcome  !  This is a great place to be  '  Frank
Frank (The Sparrow) Pataha, Washington

Offline penderbender

  • Member
  • Posts: 733
  • island life...
Re: Not sure where to introduce myself to the forum...
« Reply #10 on: July 02, 2017, 02:48:08 pm »
Welcome Jim! This is a great community. You should check out the point of the month thread. Cheers- Brendan

Offline iowabow

  • member
  • Member
  • Posts: 4,718
Re: Not sure where to introduce myself to the forum...
« Reply #11 on: July 02, 2017, 10:13:46 pm »
Welcome nice point
(:::.) The ABO path is a new frontier to the past!

Offline Hawkdancer

  • Member
  • Posts: 5,027
Re: Not sure where to introduce myself to the forum...
« Reply #12 on: July 02, 2017, 11:19:06 pm »
Welcome aboard!  You should fit in quite well!   Loon is the only one who rants ;D >:D - the rest of us just rave! But we get her done, sort of.  Loon, no offense meant,  just fits in :) >:D :BB. These folks will provide a lot of help, and a chuckle or two!
Hawkdancer
Life is far too serious to be taken that way!
Jerry

Offline Knapper

  • Member
  • Posts: 1,057
  • David Atnip
Re: Not sure where to introduce myself to the forum...
« Reply #13 on: July 03, 2017, 08:35:01 pm »
Welcome Jim. Keep breaking those rocks and posting the pictures. There is more knowledge here and great guys than you'll find anywhere.
Knapper
Ad Dare Servire
PM104250

Offline Bone pile

  • Member
  • Posts: 1,490
Re: Not sure where to introduce myself to the forum...
« Reply #14 on: July 05, 2017, 06:52:11 am »
hello my name is Bone pile and I'm a flint knapper. Welcome to the addiction
Venice Florida