« previous next »
Pages: [1]

Author Topic: Spine average?  (Read 1755 times)

0 Members and 1 Guest are viewing this topic.

Offline Hawkdancer

  • Member
  • Posts: 5,027
Spine average?
« on: July 15, 2017, 12:13:49 am »
Noticed my shoots spine differently depending on what side I measure.  Got them to a fairly uniform 3/8 inch, but one side measures stiffer by as much as 50% more.  Is this common with shoots?  See how they fly before getting concerned? Or just average the readings and fletch the stiff side to the bow?
Hawkdancer
Logged
Life is far too serious to be taken that way!
Jerry

Offline sleek

  • Member
  • Posts: 6,680
Re: Spine average?
« Reply #1 on: July 15, 2017, 02:04:41 am »
Place the stiff side to the bow is what I have always been told. Id certainly bare shaft them though before investing hours of work.
Logged
Tread softly and carry a bent stick.

Dont seek your happiness through the approval of others

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,482
Re: Spine average?
« Reply #2 on: July 15, 2017, 07:55:08 am »
Yes, the stiff side goes against the bow.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline willie

  • Member
  • Posts: 3,174
Re: Spine average?
« Reply #3 on: July 15, 2017, 06:00:46 pm »
you could consider static spine as way to get into the ball park. matching weight on a set and individual tuning can be useful also
Logged
Pages: [1]
« previous next »