Author Topic: Hackberry Molly (Finished Pictures Added)  (Read 22582 times)

0 Members and 1 Guest are viewing this topic.

Offline Danzn Bar

  • Member
  • Posts: 4,166
Hackberry Molly (Finished Pictures Added)
« on: July 24, 2017, 08:18:39 pm »
Hey Guys,
Working on a Hackberry Molly ....One of the limbs has a pretty big knot in it with a lot of soft punky wood.  I've dug out the bad wood. and have it to short brace and pulling about 10", Heat treated it and it's ready for full brace. 
Question for you guys......need some ideas
What would you do with the knot hole?   Leave it?  Fill it, with what and when.  I'm leaning towards filling it but want something special/different.  It's got osage tip overlays, might plug it with osage?......What do you guys think?
Thanks
DBar
« Last Edit: November 18, 2017, 03:07:22 pm by Danzn Bar »
Integrity is doing the right thing when no one is looking

Offline DC

  • Member
  • Posts: 10,396
Re: Hackberry Molly
« Reply #1 on: July 24, 2017, 08:42:49 pm »
I would lean toward leaving it open. I like holes. If you fill it with Osage would you drill it out and put in a round plug? I have this gut feeling that a natural shaped hole would be stronger than one that was drilled but my gut has been wrong many times. Someone(Simon maybe) did one with turquoise powder and epoxy that looked real nice. Kind of like an ear ring on a biker.
« Last Edit: July 24, 2017, 09:07:57 pm by DC »

Offline bjrogg

  • Member
  • Posts: 10,701
  • Cedar Pond
Re: Hackberry Molly
« Reply #2 on: July 24, 2017, 09:00:47 pm »
I was kinda thinking like D.C. Said. I've never done it but some turquoise dust would probably look good.
Bjrogg
A hot cup of coffee and a beautiful sunrise

Offline wizardgoat

  • Member
  • Posts: 2,397
Re: Hackberry Molly
« Reply #3 on: July 24, 2017, 09:18:18 pm »
Recently I used some charcoal powder in epoxy, I really like the look of black plugged hole

Offline ---GUTSHOT--->

  • Member
  • Posts: 1,310
Re: Hackberry Molly
« Reply #4 on: July 24, 2017, 09:33:25 pm »
Osage dust and 5 min epoxy would be my filler. but a peep site is always nice!

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Hackberry Molly
« Reply #5 on: July 25, 2017, 05:45:39 am »
Id leave it be, for the cool factor. I don't believe it would change anything if you left it or filled it, just appearance.
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline upstatenybowyer

  • Member
  • Posts: 2,700
Re: Hackberry Molly
« Reply #6 on: July 25, 2017, 08:16:02 am »
PD is probably right about it not making a functional difference so it depends who the bow is for. Crushing up a substance and mixing it with epoxy could be a nice way to personalize the bow for someone.  (=)
"Even as the archer loves the arrow that flies, so too he loves the bow that remains constant in his hands."

Nigerian Proverb

Offline BowEd

  • Member
  • Posts: 9,390
  • BowEd
Re: Hackberry Molly
« Reply #7 on: July 25, 2017, 08:48:28 am »
Nice wood choice for a levered type bow I'd say being heat treated.I like the empty type hole look!!
BowEd
You got to stand for something or you'll fall for anything.
Ed

Offline Danzn Bar

  • Member
  • Posts: 4,166
Re: Hackberry Molly
« Reply #8 on: July 25, 2017, 06:32:31 pm »
I agree no functional difference just appearance.
DC, I'd fill it with osage dust and epoxy.
Yep Goat I've use epoxy and charcoal dust all the time, even with my arrows for faux pine pitch.
Leaning towards cleaning it up a bit more and leaving it as is......
But, the recipient has not responded....:)
Thanks Ed ...have always want to do one......After seeing a short recurve stixanstones did out of hackberry and a few hackberry's I've done I think it is the most underrated bow wood around.
DBar
« Last Edit: July 25, 2017, 06:38:41 pm by Danzn Bar »
Integrity is doing the right thing when no one is looking

Offline bradsmith2010

  • Member
  • Posts: 5,187
Re: Hackberry Molly
« Reply #9 on: July 25, 2017, 06:35:30 pm »
osage and epoxy,, (SH)

Offline Danzn Bar

  • Member
  • Posts: 4,166
Re: Hackberry Molly
« Reply #10 on: July 25, 2017, 07:43:02 pm »
Here's a few more progress pics to date......
Got a lot more work to do on this one.
But wanting to recurve the levers after getting the tiller almost done to about 25". Finishing the tiller to have the leavers working just a bit.  of course this is with heat treating this guy every step of the way. Hackberry loves the heat treat.............
Shooting for 50# at 26" ..but as we all know the best laid plans are bound to be destroyed by nature....
Oh I'm also planning on feathering backing the working limbs on this one if it stays together "{finger crossing}".......:)
DBar
Integrity is doing the right thing when no one is looking

Offline BowEd

  • Member
  • Posts: 9,390
  • BowEd
Re: Hackberry Molly
« Reply #11 on: July 25, 2017, 07:51:11 pm »
Sweet proflies so far DB.Cool plans for this one too.I think hackberry is underrated too.I've seen some nice ones Jon W has done too out of that wood.
BowEd
You got to stand for something or you'll fall for anything.
Ed

Offline bjrogg

  • Member
  • Posts: 10,701
  • Cedar Pond
Re: Hackberry Molly
« Reply #12 on: July 25, 2017, 07:57:41 pm »
Gonna be sweet Dbar, guess we know whose not getting it. I'm sure whoever it's going to is gonna love it.
Bjrogg
A hot cup of coffee and a beautiful sunrise

Offline Danzn Bar

  • Member
  • Posts: 4,166
Re: Hackberry Molly
« Reply #13 on: July 25, 2017, 08:07:45 pm »
Ed,
Appreciate the comments, I really enjoy your bows and knowledge to different posts....JonW's last static was very nice, but it seems to me to be a locust and Elm guy to me. ??? ;)  I've said a few times I'd like to meet that guy...:)

BJ only if it stays together...:)
DBar
« Last Edit: July 25, 2017, 09:32:21 pm by Danzn Bar »
Integrity is doing the right thing when no one is looking

Offline bubby

  • Member
  • Posts: 11,054
Re: Hackberry Molly
« Reply #14 on: July 25, 2017, 08:10:47 pm »
I like the empty look myself Bill, hackberry molly should sling some arras😉
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹