Author Topic: What size fur silencers? (Read 1848 times)

osage outlaw · « **on:** November 20, 2017, 05:25:18 pm »

What width and length do you guys usually cut your fur string silencers? I make mine about 1/4" x 6". Is that about the normal size?

bubby · « **Reply #1 on:** November 20, 2017, 05:56:13 pm »

I make mine about 5" long, same width as you clint

Danzn Bar · « **Reply #2 on:** November 20, 2017, 06:04:19 pm »

I cut mine about 5" long and closer to 1/8" wide....
Dbar

JonW · « **Reply #3 on:** November 20, 2017, 06:31:20 pm »

I make them more of a ball instead of a roll. Prolly 3 inches by 1/8.

Pat B · « **Reply #4 on:** November 20, 2017, 07:50:51 pm »

1/4" is usually how I cut then but the length is determined on the shape you want, from round to sausage shaped.

George Tsoukalas · « **Reply #5 on:** November 21, 2017, 07:25:02 am »

1/4" wood by about 4" long. I tuck them in just under the Flemish splice, wind them around, and tuck back in. Jawge

BowEd · « **Reply #6 on:** November 21, 2017, 07:46:51 am »

Seems like it does'nt take much to quell any string humm noise.

Pat B · « **Reply #7 on:** November 21, 2017, 08:38:47 am »

...plus the more you have is you detract from the cast.

PEARL DRUMS · « **Reply #8 on:** November 21, 2017, 08:41:05 am »

Try just strips of soft leather 1/4" x 4". Wrap it around just like fur on leather.

ohma2 · « **Reply #9 on:** November 21, 2017, 01:10:53 pm »

Muskrat really is nice stuff ,fluffs up nice and doesnt take much,like 1/8×4"

Pat B · « **Reply #10 on:** November 21, 2017, 03:48:20 pm »

I think in most cases string silencers are more cosmetic than a necessity...but they do look cool.

Primitive Archer