Ok thanks Im going to try to keep all measurments with in a couple 1/1000 Im just going to build it and see where Im at like Steve & others have said, hopefully not much scraping will be needed belly wise and I will have to accept the draw weight with in a tight range so here are the specs so far
Tri lam Design
Stack 0.4375 (7/16 in)
Hickory. Parallel 0.1775
Osage Parallel. 0.130
Osage Taper 0.130. @0.001 TPI
TTT 66 in
NTN 64.5
WL 26.25
Front view 2 in. To 3/8 in. Pyramid
12 in. Riser 3 in. Fades