Author Topic: I might be close....  (Read 1065 times)

0 Members and 1 Guest are viewing this topic.

Offline paulc

  • Member
  • Posts: 656
I might be close....
« on: January 20, 2018, 04:44:14 pm »
So I caught this bug about 18yrs ago...it seems to come and go depending on life.  It has lately resurfaced and I may have almost made a bow on my own.  2 summers ago  local guy named Martin responded to a random email from me and donated me an osage blank and his Sunday afternoon.  Before I left his place I had a pretty ugly but very shootable osage bow.  Since then hurricanes and life have kept me from working on a bow.  I've finally been able to spend some time with my own stuff these last 8-12 weeks.  I cut this hickory in north Ga just before I moved to the Savannah area (i've been sitting on this wood for fully 16yrs).  I then promptly abused the hell out of it storing it outside for several months before realizing the bugs in south Ga are happy to eat north Ga wood.  So then it sat in the corner of my man cave for years and I would sometimes take a piece out and reduce it to kindling before moving on to something else.  I made some pretty poor quality bamboo backed hickory kindling :-)

Today I think I am close but not quite there.  It's a less than great piece that did not split well so the handle is missing some splintery chunks.  And one fade started pretty weird-I didn't make it that thin.  It came that way out of the tree.  It pulls maybe 35lbs at 26" which is lighter than I wanted but that fact it almost bends well is victory enough for me.  It's about 64" end to end.

Could I toast the belly and get the pounds up a bit?  And where should I be scraping as I get closer to being done? This wood is measuring MC of about 10.5% for whatever that is worth.

Thanks for the feedback!  Have some pieces of hickory left and some hackberry and mulberry coming from an ebay vendor based in NE.  Super excited about the new wood coming but want to do at least one more hickory bow that comes in over 45lbs before I try the new wood.

Offline aaron

  • Member
  • Posts: 1,037
Re: I might be close....
« Reply #1 on: January 20, 2018, 04:58:38 pm »
Outer limbs look stiff. Right limb near fade looks hinged
Ilwaco, Washington, USA
"Good wood makes great bows, but bad wood makes great bowyers"

Offline Jim Davis

  • Member
  • Posts: 1,349
  • Reparrows
    • Reparrows
Re: I might be close....
« Reply #2 on: January 20, 2018, 05:15:39 pm »
Moisture content needs to be lower for hickory. You would probably gain a little weight if it dries more.

Hope you never get a snow load on that roof. It would come down without a whimper!
Jim Davis

Kentucky--formerly Maine

Offline paulc

  • Member
  • Posts: 656
Re: I might be close....
« Reply #3 on: January 20, 2018, 05:28:47 pm »
It held up to 1/2" slush last week and hurricane Irma.

Not sure wht to do about MC here in South Ga. I assume it's just gonna soak up moisture unless I poly it or something?

Thanks, P

Offline upstatenybowyer

  • Member
  • Posts: 2,700
Re: I might be close....
« Reply #4 on: January 20, 2018, 07:57:20 pm »
I agree with aaron. I'd try to get the outer limbs bending a bit more. Not sure what to tell ya about that area just off the fade on the right, but perhaps by getting the outers working more it might look less hingy than it does now.

To increase the weight, toasting the belly would be a good idea and perhaps pike an inch off each tip. 

Glad your back at it!  :)
"Even as the archer loves the arrow that flies, so too he loves the bow that remains constant in his hands."

Nigerian Proverb